HIGH TEMPERATURE TENSILE PROPERTIES OF NEW FE-CR-MN DEVELOPED STEEL

Authors

  • M. Mahmoudiniya Iran University of Science and Technology (IUST), School of Metallurgy and Materials Engineering, Tehran, Iran.
  • Sh. Kheirandish Iran University of Science and Technology (IUST), School of Metallurgy and Materials Engineering, Tehran, Iran.
Abstract:

Nowadays, Ni-free austenitic stainless steels are being developed rapidly and high price of nickel is one of the most important motivations for this development. At present research a new FeCrMn steel was designed and produced based on Fe-Cr-Mn-C system. Comparative studies on microstructure and high temperature mechanical properties of  new steel and AISI 316 steel were done. The results showed that new FeCrMn developed steel has single austenite phase microstructure, and its tensile strength and toughness were higher than those of 316 steel at 25, 200,350 and 500°C. In contrast with 316 steel, the new FeCrMn steel did not show strain induced transformation and dynamic strain aging phenomena during tensile tests that represented higher austenite stability of new developed steel. Lower density and higher strength of the new steel caused higher specific strength in comparison with the 316 one that can be considered as an important advantage in structural applications but in less corrosive environment

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Effects of Bainitic Transformation Temperature on Microstructure and Tensile Properties of 0.6C-Si-Mn Steel

1 緒 言 工具や軸受,ゲ ージなどの精密部品では残留オーステ ナイ ト(rR)が存在すると硬 さや疲労寿命の低下,切 削性 不良あるいは経年形状変化を招きそれらの性質に有害な 影響をもたらす.そ れゆえ,こ れ らに使用する鋼では rRを 極力減少させ るのが好 ましい.し か しなが ら,rR が低合金構造用鋼に存在する場合には延性やじん性が向 上するとともに低温におけるぜい性破壊の防止に役立つ 場合が多い.そ れゆえ,最 近進んで熱処理によって人 為的にrRの 量や存在形態を調整 し混合組織 として優れ た機械的性質 を得ようとす る研究が しばしば見受 けら れ1)~6)る.こ のようなrRを 積極的に利用 しようとする方法 として,近 年Si-Mn鋼 をベイナイ ト変態させるオース テンパー処理が注 目されている. Si-Mn鋼 をベイナイ ト変態 させた場合多量のrRが ...

full text

Effects of tempering temperature on tensile and hole expansion properties of a C–Mn steel

Effects of tempering temperature on tensile and hole expansion properties in a dual-phase C–Mn steel were investigated. The ultimate tensile strength and yield strength decreased and elongations increased with an increase of tempering temperature. The hole expansion property increased significantly at the tempering temperature ranging from 200 to 300 8C and did not show significant difference w...

full text

Numerical Simulation of High Temperature Corrosion Processes in Mn, Cr, Si, Al – Alloyed Steel Samples

The grain boundary oxidation mechanism in hot rolled steel samples during cooling from 500 °C – 800 °C down to room temperature was mathematically modeled. Given a fixed temperature ramp, the migration of the atomic species (iron, oxygen and the alloying elements) has been calculated with the parabolic rate equation for diffusion. After each small time step, the data was transferred into the da...

full text

Production and Characterization of Stainless Steel Based Fe-Cr-Ni-Mn-Si(-CO) Shape Memory Alloys

It is well known that the Fe based alloys can exhibit shape memory effect due to the y to E martensitic transformation. The effect may not be as striking as observed in the NiTi alloy but it might become attractive fkom the practical point of view. In this work, two compositions of Fe-Cr-Ni-Mn-Si(-Co) stainless steel based shape memory alloy, prepared by the VIM technique, will be presented. Th...

full text

Cavitation erosion of laser processed Fe-Cr-Mn and Fe-Cr-Co alloys

Purpose: Purpose of this paper is attempt explanation how laser beam processing influence on the cavitation performance of the Fe-Cr-Mn and Fe-Cr-Co alloys. This kind of alloys are frequently used in Polish power plants to routine repairs of damaged blades working under cavitation loading. Design/methodology/approach: Padding welds of investigated alloys were tested for three cases: after laser...

full text

Cavitation erosion behaviour of laser processed Fe-Cr-Mn and Fe-Cr-Co alloys

Purpose: Purpose of this paper is investigation of influence of the surface processing by laser method on the cavitation performance of the Fe-Cr-Mn and Fe-Cr-Co alloys. This kind of alloys are frequently used in Polish power plants to routine repairs of damaged blades working under cavitation loading. Design/methodology/approach: Padding welds were tested for three cases: without additional pr...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 14  issue 1

pages  47- 57

publication date 2017-03

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023