Hexadecyl Trimethyl Ammonium Bromide-Modified Montmorillonite as a Low-Cost Sorbent for the Removal of Methyl Red from Liquid-Medium

Authors

  • yusef omidi 1Department of Environmental Health Engineering, 1Department of Environmental Health Engineering, School of Health, Lorestan University of Medical Sciences, Khorramabad, Iran
Abstract:

In this study, montmorillonite (MMT) modified by a cationic surfactant (Hexadecyltrimethyl ammonium bromide, HDTMA) was used as adsorbent to the removal of methyl red (MR) from aqueous solution. The effect of different parameters includes surfactant loading rate, contact time, pH, adsorbent dosage, and initial MR content was investigated on the sorption. The sorption capacity was increased by increasing the surfactants loading rate up to 120% cation exchange capacity (CEC) of the clay. The contact time 30 min and pH of 6 were selected as the optimum for the uptake of MR. The maximum uptake capacity was obtained 1428.5 mg/g. The experimental data of the sorption was well fitted by pseudo-second-order kinetic and Freundlich isotherm models. The results show that the HDTMA-modified MMT can be applied as an effective and low cost sorbent for the removal of MR dye from aqueous solution.   

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Removal of Hexavalent Chromium from Aqueous Solutions Using Magnetic Nanoparticles Coated with Alumina and Modified by Cetyl Trimethyl Ammonium Bromide

Introduction: The development of an effective method regarding chromium removal from the environment is of great importance. Therefore, the present study aimed to examiner magnetic nanoparticles coated with alumina modified by Cetyl Trimethyl Ammonium Bromide (CTAB) in the removal of Cr6+ through magnetic solid phase extraction method. Materials & Methods: At first, iron oxide nanoparticles ...

full text

Coal Ash as a Low Cost Adsorbent for the Removal of Xylenol Orange from Aqueous Solution

The removal ofxylenol orange from aqueous solution onto the coal ash was investigated at room temperature. The results show that the adsorption capacity of xylenol orange increased as the adsorption time increased and then equilibrium established after 30 min adsorption time. The results obtained revealed that the coal ash removed about 80 % of xylenol orange from the aqueous solution withi...

full text

Removal of Alizarin Red Dye Using Calcium Hydroxide as a Low-cost Adsorbent

Calcium ions have very strong affinity and binds effectively to alizarin red dye during staining of biomaterials. This promotes us to choose calcium hydroxide as a low cost adsorbent for the removal of alizarin red dye. Various parameters such as pH, concentration, dose of adsorbent, time, and temperature have been investigated. In addition, enthalpy, entropy, free energy and activation energy ...

full text

Removal of Reactive Red 120 from Aqueous Solutions Using Albizia lebbeck Fruit (Pod) Partical as a Low Cost Adsorbent

Synthetic dyes are using extensively in various industries such as textile, leather tanning, plastic, pulp and paper. Since this dyes are mainly toxic and even carcinogenic, discharging dye containing wastewater into the environment generates serious environmental and health consequences. Therefore, in this research investigated and evaluated the removal effect of Reactive Red 120 (RR 120) from...

full text

The study of an azo dye removal from liquid medium by modified clay

In this batch study, montmorillonite was modified by a cationic surfactant [hexadecyltrimethylammonium bromide (HDTMA-MMT)] and used as sorbent to remove bromocresol green (BCG) from aqueous solutions. The effect of several factors such as surfactant loading rate onto the clay, contact time, pH, adsorbent dosage, dye concentration, and ion strength were investigated on the sorption. The equilib...

full text

Use of bauxite residue (red mud) as a low cost sorbent for sulfide removal in polluted water remediation.

Sulfide is an important pollutant in aqueous systems. Sulfide removal from polluted waters is required prior to discharge. Red mud (RM) is a solid waste of bauxite processing that is rich in reactive iron oxides and consequently has the potential to be used to remove sulfide from aqueous systems. A series of experiments was undertaken using raw and sintered RM to remove sulfide from waters. RM ...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 29  issue 1

pages  60- 67

publication date 2016-01-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023