Future MISFET gate dielectric: NiO/PVA Nanohybride composites
author
Abstract:
This paper has reported on the electrical and nonstructural of polymer-based materials in corporation NiO (Nickel oxide) in concentrations of 0.2%, 0.4% and 0.8% by weight of PVA (polyvinyl alcohol) polymer. Nanocrystallites phases and properties were characterized with using X-ray diffraction (XRD), Fourier transfer infrared radiation (FTIR),Energy distribution X-ray(EDX) techniques and X-Map images, scanning electron microscopy (SEM) and atomic force microscopy(AFM) techniques.The dielectric constant of the samples has been calculated through measuring the capacity of the samples by application of GPS 132 A. Electrical property characterization was also performed with cyclic-voltameter (C-V) technique in TRIS solution (pH = 7.3, with the formula (HOCH2)3CNH2.
similar resources
Channel thickness dependency of high-k gate dielectric based double-gate CMOS inverter
This work investigates the channel thickness dependency of high-k gate dielectric-based complementary metal-oxide-semiconductor (CMOS) inverter circuit built using a conventional double-gate metal gate oxide semiconductor field-effect transistor (DG-MOSFET). It is espied that the use of high-k dielectric as a gate oxide in n/p DG-MOSFET based CMOS inverter results in a high noise margin as well...
full textHomogenization of Elastic Dielectric Composites
This paper presents the derivation of the homogenized equations for the macroscopic 5 response of elastic dielectric composites containing space charges (i.e., electric source terms) that 6 oscillate rapidly at the length scale of the microstructure. The derivation is carried out in the setting 7 of small deformations and moderate electric fields by means of a two-scale asymptotic analysis. 8 T...
full textAlN/GaN insulated gate HEMTs with HfO2 gate dielectric
AlN/GaN single heterojunction MOS-HEMTs grown by molecular beam epitaxy have been fabricated utilising HfO2 high-K dielectrics deposited by atomic layer deposition. Typical DC transfer characteristics of 1.3 mm gate length devices show a maximum drain current of 950 mA/mm and a transconductance of 210 mS/mm with gate currents of 5 mA/mm in pinch-off. Unity gain cutoff frequencies, ft and fmax, ...
full textDouble-Gate Tunnel FET With High-κ Gate Dielectric
In this paper, we propose and validate a novel design for a double-gate tunnel fi eld-effect transistor (DG Tunnel FET), for which the simulations show significant improvements compared with single-gate devices using an SiO2 gate dielectric. For the fi rst time, DG Tunnel FET devices, which are using a high-κ gate dielectric, are explored using realistic design parameters, showing an ON-current...
full textمقایسه ویژگی نانو ساختاری اکسید آلومینیوم و اکسید تیتانیوم
Recently, high – K materials such as Al2O3 and TiO2 films have been studied to replace ultra thin gate silicon dioxide film. In the present work, these films were grown on the top of Si(100) surface at different temperatures and under ultra high vacuum conditions. The obtained results showed that Al2O3 has a structure better than that of TiO2 and thus can be used as a good gate dielectric ...
full textPaper Technology of MISFET with SiO2/BaTiO3 System as a Gate Insulator
The properties of barium titanate (BaTiO3 , BT), such as high dielectric constant and resistivity, allow it to find numerous applications in the field of microelectronics. In this work silicon metal-insulator-semiconductor field effect transistor (MISFET) structures with BaTiO3 thin films (containing La2O3 admixture) acting as gate insulator were investigated. The films were produced by means o...
full textMy Resources
Journal title
volume 1 issue 2
pages 65- 72
publication date 2018-03-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023