Formability Study of Steel Tailor laser Welded Blanks (TWB) in Stretch Forming
Authors
Abstract:
The use of TWB has been developed in automotive industries because of it’s advantages such as reduction in weight, cost and fuel economy of vehicles. The main objective of the peresent work is to study the effects of weld zone, diffrence in surface coating and thickness ratio on the formability of TWB composed of AISI 304, SPCC and IF steel sheets. It was found that the narrow weld zone has little effect on the formability of TWB. Results of LDH testing of TWB reveals the formability of TWB decrease as the thickness ratio of sheet increases. Fracture in LDH testing of TWB that composed of steel sheets with different surface coating occured on uncoated sheet because of changing in surface friction conditions.
similar resources
formability study of steel tailor laser welded blanks (twb) in stretch forming
the use of twb has been developed in automotive industries because of it’s advantages such as reduction in weight, cost and fuel economy of vehicles. the main objective of the peresent work is to study the effects of weld zone, diffrence in surface coating and thickness ratio on the formability of twb composed of aisi 304, spcc and if steel sheets. it was found that the narrow weld zone has lit...
full textInvestigation on Formability of Tailor-Welded Blanks in Incremental Forming
Steel laser tailor-welded blanks (TWBs) are produced by end-to-end joining of base sheets using different welding methods. In this article, the formability of laser TWBs of St12 and St14 with thicknesses of 1 mm and 1.5 in single point incremental forming process were experimentally and numerically investigated. First, the forming limit wall angle was experimentally determined for each of the b...
full textFormability Analysis of Diode-Laser-Welded Tailored Blanks of Advanced High-Strength Steel Sheets
Currently, advances due to tailored blanking can be enhanced by the development of new grades of advanced high-strength steels (HSSs), for the further weight reduction and structural improvement of automotive components. In the present work, diode laser welds of three different grades of advanced high-strength dual-phase (DP) steel sheets (with tensile strengths of 980, 800, and 450 MPa) to hig...
full textMechanical Properties Improvement of Laser Tailor Welded Blanks of DP600 Steel by Magnetic Treatment
Yanli Song 1,2,3,*, Cheng Yu 1,2,3, Hailong Yu 3 and Chenyu Zhao 3 1 Hubei Key Laboratory of Advanced Technology of Automotive Parts, Wuhan University of Technology, Wuhan 430070, China; [email protected] 2 Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan University of Technology, Wuhan 430070, China 3 School of Automotive Engineering, Wuhan University of T...
full textAn Analytical Model to Predict Elongation of Tailor Welded Blanks [TWB]
Tailor Welded Blanks (TWBs) made of dissimilar, uniform or non uniform thickness materials have potential applications in automobile industries for light weight materials in order to improve fuel efficiency and cost of carrier. The focus of this paper is to develop and present analytical model to determine total elongation of tailor welded blank (TWBs). The validation of this method is done by ...
full textMy Resources
Journal title
volume 2 issue 1
pages 15- 18
publication date 2013-02-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023