Finite Element Analysis of Small-scale Head of Combine Harvester for Harvesting Fine-Grain Products
Authors
Abstract:
Brasica napus L. is one of the most important crops in the world, but every year during mechanized harvesting with conventional combines large quantities of the seeds fall to the ground and thus result in a decrease in yield. Therefore, designing and manufacturing a head specific for harvesting this crop is a high priority. In this study, the head of a combine for harvesting fine-grained products were designed, manufactured and evaluated. Initially, different designs were modeled in Solidworks 2018 software and analyzed in Ansys workbench 2019 software. The best scheme was selected between different designs and a prototype was developed. The results of the analysis indicated that the fabricated apparatus has sufficient strength and stability. The results of field tests indicate that the generalization of the proposed scheme on the scale of a real combine harvester can help to decrease the grain loss for fine-grained products.
similar resources
Mechanical analysis of cluster-grain separator device of a new head of paddy harvesting machine
This paper presents stress and strain analysis of outer shaft shoulder (OSS) and inner shaft shoulder (ISS) of a new paddy harvesting head (PHH) using finite element method (FEM). Snapping grain unit is a part of this head, with OSS and ISS as its members. The analysis was performed using the ABAQUS software with Dynamics Explicit Solution Method. Eight-node block and four-node tetrahedral elem...
full textA Pvdf Sensor for Monitoring Grain Loss in Combine Harvester
Grain loss sensor is an important monitoring module to realize the intelligent automatic control in combine harvester. Polyvinylidene fluoride piezoelectricity film has been one of the most widely used macromolecule materials at present. Based on its piezoelectric effect, in this paper, a grain loss monitoring system for combine harvester by using the PVDF sensor was designed. The system is com...
full textThe Finite Element Transient Structure Analysis of the Startup of the Sugarcane Harvester Transfer Case
The broken bearings and great noise and vibration often occurs with the small sugarcane harvester transfer case when it starts up working. To analyze the startup status of the transfer case conveniently and quickly, the finite element transient structure analysis is carried out. with virtual prototype technology to simulate the transfer case's startup dynamic process and measure the instantaneo...
full textIntroduction and discussion about three types of fine grain products and their harvesters
Fine grain products are harvested in two manual and mechanized forms. Nowadays, common combine harvesters are used, but fine grain products such as Rapeseed, Sesame and Sorghum cannot be harvested with conventional heads of combine harvesters due to the excessive grain loss in the head of the combine. Therefore, the necessity of design and fabricating machines and heads of combine harvesters be...
full textoptimum adjustments of cereal combine harvester platform for canola harvesting by using of a simulated platform
in recent decades, canola has been considered as the most important oilseed. harvesting is the most major problem of canola cultivation, since canola pods are very sensitive to shocks and vibrations. large amount of produce will fall on the ground especially when the combine's head is not adjusted properly. when canola harvested with a combine, the losses may reach up to 50%. the yields can be ...
full textMy Resources
Journal title
volume 8 issue 4
pages 340- 358
publication date 2020-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023