Fe/TiO2 Catalyst for Photodegradation of Phenol in Water
Authors
Abstract:
In this work, Fe/TiO2 nanostructured catalyst was prepared using sol-gel method developed by Yoldas and tested in degradation of phenol in water under UV radiation. The synthesized catalyst was characterized by XRF, XRD, specific surface area and porosimetry, and SEM methods. The porosimetry revealed the mesopore structure of the catalyst. Results of SEM confirmed the nano dispersion of iron oxides on titania support. Effects of Fe load of the catalyst, dosage of the catalyst, pH, H2O2 amount, and time were investigated. Results of phenol photodegradation over Fe/TiO2 showed that the reaction followed an apparent first order kinetics at low phenol concentration and the apparent rate constant was 0.0017 min-1. Also, there was an optimum for Fe load of the catalyst.
similar resources
Carbon foams as catalyst supports for phenol photodegradation.
A carbon foam using coal tar pitch as precursor was prepared and investigated as support for titanium oxide for the photocatalytic degradation of phenol. The performance of the carbon foam/titania composite was compared to those of unsupported titania and other activated carbon composites from the literature. The photodegradation rate of phenol over the catalysts under UV illumination was fitte...
full textCatalyst Systems for the Oxidation of Phenol in Water
The oxidation of phenol solutions (5 g/L) has been studied in a semibatch autoclave reactor. Activity screening experiments were performed over two commercial catalysts: CuO+ZnO (Topsoe) and CuO+NiO (Engelhard), and CuO/Al2O3 prepared in our laboratory. Isothermal runs between 393 and 423 K were carried out under an oxygen pressure of 7 bar. Phenol conversion as well as pH and Chemical Oxygen D...
full textsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
The enhancement of photodegradation efficiency using Pt-TiO2 catalyst.
This study investigates the mechanism of photosensitization and the recombination of excited electron-hole pairs affected by depositing platinum (Pt) on the surface of titanium dioxide (TiO2). A new catalyst of Pt-TiO2 was prepared by a photoreduction process. Being model reactions, the photocatalytic oxidation of methylene blue (MB) and methyl orange (MO) in aqueous solutions using the Pt-TiO2...
full textnano-rods zno as an efficient catalyst for the synthesis of chromene phosphonates, direct amidation and formylation of amines
چکیده ندارد.
The optimum conditions for synthesis of Fe3O4/ZnO core/shell magnetic nanoparticles for photodegradation of phenol
The photocatalysis of phenol was studied using Fe3O4/ZnO core/shell magnetic nanoparticles (MNPs). The photocatalysts were synthesized by coating of ZnO onto the magnetite by precipitation method and characterized by XRD, SEM and FTIR measurements. Using the Taguchi method, this study analyzes the effect of parameters such as calcinations time, calcinations temperature and molar ratio of Fe3O4:...
full textMy Resources
Journal title
volume 28 issue 4
pages 499- 506
publication date 2015-04-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023