Explicit Stiffness of Tapered and Monosymmetric i Beam-Columns
Authors
Abstract:
A formulation for finite element analysis of tapered and monosymmetric I shaped beam-columns is presented. This is a general way to analyze these types of complex elements. Based upon the formulation, member stiffness matrix is obtained explicitly. The element considered has seven nodal degrees of freedom. In addition, the related stability matrix is found. Numerical studies of the aforementioned members show the validity and accuracy of the formulation in comparison to the other ones.
similar resources
the effect of explicit teaching of metacognitive vocabulary learning strategies on recall and retention of idioms
چکیده ندارد.
15 صفحه اولStability and vibration analyses of tapered columns resting on one or two-parameter elastic foundations
This paper presents a generalized numerical method to evaluate element stiffness matrices needed for the free vibration and stability analyses of non-prismatic columns resting on one- or two-parameter elastic foundations and subjected to variable axial load. For this purpose, power series approximation is used to solve the fourth–order differential equation of non-prismatic columns with v...
full textThe effect of discrete lateral and torsional bracings stiffness on the elastic lateral-torsional buckling of mono-symmetric I beam, under the concentrated moment
When the out-of-plane stiffness of a beam is remarkably lower than the in-plane stiffness, the lateral-torsional buckling occurs. In this study, the behavior of mono-symmetric I-beams with discrete torsional and lateral bracings under the concentrated moment is investigated using the finite element analyses. Then, based on the numerical analyses, equation for the stiffness requirement is propos...
full textSeismic Behavior of Steel Reinforced Concrete Beam-Columns and Frames
The ability to perform accurate nonlinear simulations is a key component in the assessment of the behavior of seismic force resisting systems. A three-dimensional distributed plasticity formulation for composite beam-columns suitable for nonlinear static and dynamic analyses of composite seismic force resisting systems has been developed. New uniaxial constitutive relations are developed for th...
full textCyclic Evolution of Damage and Beam-column Interaction Strength of Concrete-filled Steel Tube Beam-columns
The assessment of response of composite seismic force resisting systems requires accurate nonlinear formulations for the composite members. In this work, reporting the first phase of a NEES project, a three-dimensional distributed plasticity formulation is presented for both circular and rectangular composite concrete-filled steel tubes (CFTs) that includes new constitutive models for the concr...
full textBeam propagation in parabolically tapered graded-index waveguides.
To a good approximation, the electromagnetic-propagation characteristics of graded-index waveguides can be written in terms of polynomial-Gaussian modes. For uniform quadratic-index waveguides the behavior of these modes is well known. However, there are sometimes practical reasons for using tapered waveguides, but detailed propagation solutions are known for only a few specific taper functions...
full textMy Resources
Journal title
volume 13 issue 2
pages 1- 18
publication date 2000-05-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023