Experimental Study of Nitrate Absorption Isotherms Determination on Latium Composite Overactive Carbon
Authors
Abstract:
The aim of this study is to verify the amount of nitrate absorption on Latium composite over active carbon in which pH parameters, temperature, pollutant concentration, contact time for absorbent were considered. It was determined that optimum condition for absorbent are pH=3, T= 0 ˚C and initial concentration of solution=10 ppm, then absorption parameters verified and after drawing absorption isotherms (Langmuir, freundlich) in nitrate absorption process it was evident that languir model had the most conformity with experimental data gained Latium composite on active carbon
similar resources
مطالعه تجربی تعیین ایزوترم جذب نیترات روی کامپوزیت......
the aim of this study is to verify the amount of nitrate absorption on latium composite over active carbon in which ph parameters, temperature, pollutant concentration, contact time for absorbent were considered. it was determined that optimum condition for absorbent are ph=3, t= 0 ˚c and initial concentration of solution=10 ppm, then absorption parameters verified and after drawing absorption...
full textAdsorption of Lead and Copper by a Carbon Black and Sodium Bentonite Composite Material: Study on Adsorption Isotherms and Kinetics
The efficiency of using a composite of carbon black and sodium bentonite in treating drinking water contaminated with lead and copper ions was analysed. The effects of pH, contact time, concentration and adsorbent dosage using an adsorbent composite of 20 % sodium bentonite and 80 % carbon black were studied. The adsorption data was tested with respect to Langmuir, Freundlich and Temkin iso...
full textExperimental Determination of Moisture Sorption Isotherms of Okro Fruit
The sorption isotherm ( desorption and adsorption ) of okro fruit was determined at three temperatures of 300C,400C and 500C within the range of 1090% Relative humidity (RH). Thymol solution was placed inside the desiccators to prevent microbial growth, particularly at the relative humidity above 65%. Gravimetric method was used for the sorption isotherm where the reading and recording was take...
full textModeling and Experimental Study of Carbon Dioxide Absorption in a Flat Sheet Membrane Contactor
comIn the present study, CO2 removal from natural gas stream has been studied using a flat sheet membrane contactor. A three dimensional mathematical model is developed to describe the process. The model considers the transport of a gas mixture containing carbon dioxide and methane through a flat sheet membrane contactor module. The model is based on the non-wetted mode of operation, in which t...
full textExperimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading
This paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. Some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...
full textStudy and Electrochemical Determination of Tyrosine at Graphene Nanosheets Composite Film Modified Glassy Carbon Electrode
A graphene nanosheets (GNS) film coated glassy carbon electrode (GCE) was fabricated for sensitive determination of tyrosine (Tyr). The GNS-based sensor was characterized by scanning electron microscope and electrochemical impedance spectroscopy. The voltammetric techniques were employed to study electro-oxidation of Tyr. The results revealed that the modified electrode showed an electrocatalyt...
full textMy Resources
Journal title
volume 2 issue 4
pages 239- 246
publication date 2016-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023