Estimation on the 3D porosity of plain weft knitted fabric under wale extension
Authors: not saved
Abstract:
This article doesn't have abstract
similar resources
Loop Length of Plain Single Weft Knitted Structure with Elastane
For decades, scientists have been trying to define relationships among yarn parameters, knitted fabric parameters, and knitting parameters with loop models. Recently, the geometrical loop models have returned to focus as they assist finding the effective parameters which cause dimensional changes during relaxation. Furthermore, they help designing knitted structures for technical applications a...
full textTextile-Based Weft Knitted Strain Sensors: Effect of Fabric Parameters on Sensor Properties
The design and development of textile-based strain sensors has been a focus of research and many investigators have studied this subject. This paper presents a new textile-based strain sensor design and shows the effect of base fabric parameters on its sensing properties. Sensing fabric could be used to measure articulations of the human body in the real environment. The strain sensing fabric w...
full textThe Effect of Stretching on Ultraviolet Protection of Cotton and Cotton/Coolmax-Blended Weft Knitted Fabric in a Dry State
In this paper, the ultraviolet protection factor (UPF) of weft knitted fabrics made from 20Ne cotton yarn, Coolmax yarn and their blends in dry, relaxed and stretched states were studied. According to the fibre composition, samples were divided into three groups: Group I (single cotton yarn); Group II (cotton/cotton combination); and Group III (Coolmax/cotton combination) for discussion. In add...
full textEffect of Stretching on Ultraviolet Protection of Cotton and Cotton/Coolmax Blended Weft Knitted Fabric in a Wet State
In this paper, the ultraviolet protection factor (UPF) of plain knitted fabrics made from 20Ne cotton yarns, Coolmax yarn and their combinations in wet, relaxed and stretched states were studied. According to the fiber composition, fabric samples are divided into three groups including Group I (single cotton yarn), Group II (cotton/cotton combination) and Group III (Coolmax/cotton combination) ...
full textInvestigation into the Curling Intensity of Polyester/Cotton Single Jersey Weft Knitted fabric Using Finite Element Method
Curling of knitted fabrics edges is one of the complicated problems of these structures. Therefore, study and measurement of curling in knitted fabrics is important. In this study, it is tried to model the three-dimensional wale wise curl of the fabric using finite element modelling. In this model the tensions in different parts of a knitted loop due to bending and torsional forces in knitting ...
full textMechanical Properties of Composite Materials Made of 3D Stitched Woven-knitted Preforms
This article presents an experimental investigation carried out to understand the mechanical behavior of composite materials made of 3D stitched woven-knitted basalt fabrics. The innovative preforms used consist of two outer layers of a plain woven fabric combined with two inner layers of weft-knitted fabrics. The weft-knitted fabrics selected for the study were varied plain knit, 1 × 1 rib, Mi...
full textMy Resources
Journal title
volume 2 issue 2
pages 25- 31
publication date 2014-06-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023