Estimating of erosion and sediment yield of Gorganrud basin using erosin potential method
Authors
Abstract:
Soil erosion can be considered as one of the most important obstacles in the way of sustainable development of agriculture and natural resources. The aim of this study is to estimate erosion and sediment yield of basin using Erosion Potential Method, in Gorganrud basin, north of Iran. The main factors in the EPM (slope average percent, erosion, rock and soil resistance, and land-use) were evaluated using a GIS software. Then, each of the parameters has been classified in different categories based on the importance. Finally, the prepared layers integrated and overlaid in EPM model, and soil erosion map are calculated. The spatial distribution of erosion intensify classes showed that 7.4% of the total basin area had tolerate erosion, 25.9% slight erosion, 27.96% moderate erosion, 10.46% strong erosion, 9.91% very strong erosion, and 18.34% destructive erosion. The highest amount of erosion occurred in the northwest to northeast regions with lithological units including loess, and alluvial deposits and agricultural use despite the fact that slope factors in these areas were less than 10%. In the central, western, and eastern parts of the basin, in spite of 15%-55% of slope, the areas depicted a slight to moderate potential of erosion. This is supposed to be due to the dense forest coverage in the region that decreases the energy of rain droplets. Results showed that about 66.7% of the study area is classified in moderate to destructive erosion intensify (Wsp >15 t ha-1 year-1). For avoiding soil erosion in this basin, soil conservation operation should be performed.
similar resources
Estimation of erosin and sediment yield with EPM model in Zemkan basin using GIS
The goal of this study is determination of erosion rate and sediment production and exploring sensitive areas of erosion in Zemkan basin, located in the West of Kermanshah Province.To achieve these objectives, the erosion potential method (EPM) was used.Geographical information system also was used to reduce the errors and increase the relative accuracy in the analysis of the model. Required da...
full textEstimation of erosion and sediment yield of Ekbatan Dam drainage basin with EPM, using GIS
Soil conservation and control of erosion is a basic problem in all countries. The goal of this research is to estimate erosion and sediment yield in Ekbatan Dam drainage basin by Erosion Potential Method (EPM), using Geographic Information System (GIS). The basin is located in Hamedan Province, west of Iran, in a cold and semi- arid region, with an average annual rainfall of 334mm. The study ar...
full texteffect of seed priming and irrigation regimes on yield,yield components and quality of safflowers cultivars
این مطالعه در سال 1386-87 در آزمایشگاه و مزرعه پژوهشی دانشگاه صنعتی اصفهان به منظور تعیین مناسب ترین تیمار بذری و ارزیابی اثر پرایمینگ بر روی سه رقم گلرنگ تحت سه رژیم آبیاری انجام گرفت. برخی از مطالعات اثرات سودمند پرایمینگ بذر را بر روی گیاهان مختلف بررسی کرده اند اما در حال حاضر اطلاعات کمی در مورد خصوصیات مربوط به جوانه زنی، مراحل نموی، عملکرد و خصوصیات کمی و کیفی بذور تیمار شده ژنوتیپ های م...
estimation of erosion and sediment yield of ekbatan dam drainage basin with epm, using gis
soil conservation and control of erosion is a basic problem in all countries. the goal of this research is to estimate erosion and sediment yield in ekbatan dam drainage basin by erosion potential method (epm), using geographic information system (gis). the basin is located in hamedan province, west of iran, in a cold and semi- arid region, with an average annual rainfall of 334mm. the study ar...
full textEstimation of soil erosion and sediment yield using GIS
A Geographical Information System (GIS) based method is proposed and demonstrated for the identification of sediment source areas and the prediction of storm sediment yield from catchments. Data from the Nagwa and Karso catchments in Bihar (India) have been used. The Integrated Land and Water Information System (ILWIS) GIS package has been used for carrying out geographic analyses. An Earth Res...
full textchemical recycling of polycarbonate waste using conventional heating and microwave assisted method
پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...
My Resources
Journal title
volume 3 issue 1
pages 19- 32
publication date 2017-01-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023