Electrodeposition and Characterization of Sn-Zn Alloy Coatings from Sulfate Based Baths

ELECTRODEPOSITION OF Ni-Fe ALLOYS FROM SULFATE, SULFATE-CHLORIDE AND CHLORIDE BATHS

In an attempt to control the film composition, factors affecting the composition of Ni-Fe alloy deposits and their crystal structure have been analyzed as a function of bath composition, cathode current density, bath pH, temperature and an addition of citric acid. antimony electrode revealed that the deposition potential of Fe coincides with the potential where the abrupt increase of pH was obs...

Electrodeposition of Alloys Coatings from Electrolytic Baths Prepared by Recovery of Exhausted Batteries for Corrosion Protection

Voltammetric Determination of Zn(II) in Zn-Fe Alloy Electroplating Baths Using Square-Wave Voltammetry

Desenvolveu-se um método de análise de rotina para a determinação quantitativa de zinco em banhos de galvanoplastia de liga Zn-Fe através da técnica de voltametria de onda quadrada utilizando-se, como eletrodo de trabalho, o eletrodo de gota estática de mercúrio. Amostras reais de banhos de liga foram analisadas sem pré tratamento através do método de adição de padrão. Também foram feitos teste...

ELECTRODEPOSITION AND CHARACTERIZATION OF Ni - Co - P - BN DISPERSION COATINGS

Functional plating such as alloys or dispersion coatings have been widely used in metal finishing industry. In general, dispersion coatings are deposited from plating baths containing suspended particles such as metal oxides, carbides, metals or organic materials,(l-3) Codeposited particles in the dispersion coatings have the remarkable influence on the properties of the deposits depending on t...

Electrodeposition of Nanostructured Magnesium Coatings

In this work, we report on the electroplating of ultrafine and uniform magnesium (Mg) films on copper (Cu) and carbon nanotube (CNT) paper substrates. By controlling the process parameters and utilizing the pulsed deposition method, the average grain size of Mg was reduced to nanodimensions. Surface pretreatment of the substrates by depositing a seed layer was found to be an efficient strategy ...

Effect of Y Addition on the Microstructure and Mechanical Properties of Sn-Zn Eutectic Alloy

The effect of Yttrium addition on the microstructure and mechanical properties of Sn-Zn eutectic alloy, which has been attracting intensive focus as a Pb-free solder material, was investigated in this study. Phase equilibrium has been calculated by using FactSage® to evaluate the composition and fraction of equilibrium intermetallic compounds and construct a phase diagram. In the case of Sn-8.8...