Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals

Authors

Abstract:

Immiscible metals due to their inherent specs are insoluble over the steady state. Developing an innovative approach to this issue would be fascinating and challenge the overriding rules. Herein, we proffer the principles of synthesis of Cu-Nb nanocomposites using electrochemical deoxidation route. This method consists of the cathodic electrolysis of the nanoparticles Cu-Nb2O5 through the molten salt electrolyte medium; which lead to the oxygen-free nanocomposites following the reduction of Nb2O5 and atomic translocation of Cu/Nb. Analysis of as-synthesized specimens by X-ray diffraction implies the Nb2O5 is reduced into Nb and all reflections of Cu are shifted to low-angles. Moreover, elemental analysis by energy dispersive spectrometry (EDS) illustrates the high solubility of Nb in Cu and Cu in Nb structure, which their crystallinity is consistent with the XRD. These findings confirm the electro-synthesis is a key technique for reduction of nanometer oxides, the substantial increase of solubility, and nano-alloying of immiscible metals.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Tuning structural motifs and alloying of bulk immiscible Mo-Cu bimetallic nanoparticles by gas-phase synthesis.

Nowadays bimetallic nanoparticles (NPs) have emerged as key materials for important modern applications in nanoplasmonics, catalysis, biodiagnostics, and nanomagnetics. Consequently the control of bimetallic structural motifs with specific shapes provides increasing functionality and selectivity for related applications. However, producing bimetallic NPs with well controlled structural motifs s...

full text

A nanoglass alloying immiscible Fe and Cu at the nanoscale.

Synthesized from ultrafine particles with a bottom-up approach, nanoglasses are of particular importance in pursuing unique properties. Here, we design a metallic nanoglass alloy from two components of ∼Cu64Sc36 and ∼Fe90Sc10 nanoglasses. With nanoalloying mutually immiscible Fe and Cu, the properties of the nanoglass alloys can be tuned by varying the proportions of the ∼Fe90Sc10 component. Th...

full text

Synthesis of Cu-CuO and Cu-Cu2O Nanoparticles via Electro-Explosion of Wire Method

   We report an investigation on the synthesis of Copper Oxide nanostructures via the Electro-Explosion of Wire method. Cu-CuO and Cu-Cu2O nanoparticles with mean particle size of 21.1 to 59.1 nm were synthesized by changing the applied current density and amount of used Tetra Methyl Ammonium Hydroxide as the surfactant. The X-ray diffraction analysis, field emission scanning ele...

full text

Structural Transformation of Immiscible Metals Induced by Mechanical Alloying

X-ray absorption fine structure(XAFS) is used to investigate the local structural change of Fe60Cu40 and FegoCu20 with the ball milling time. The XAFS results verify that the solid solution of mechanically alloyed Fe-Cu samples are inhomogeneous. We propose that the bcc to fcc structural transformation of Fe small particles of Fe60Cuq0(160h) is induced by interfacial Cu atoms dissolving in smal...

full text

Surface alloying of immiscible metals induced by surface state shift

By using first principles calculations, it is found that the noble metal atoms Ag, Au and Cu would like to occupy the vacancy sites of the W(0 0 1) or Mo(0 0 1) surface to form the substitutional surface alloys, despite the fact that they do not like to form alloy in the bulk. The electronic local function (ELF) for these substitutional surface alloys shows that there is no obvious chemical bon...

full text

comparison of catalytic activity of heteropoly compounds in the synthesis of bis(indolyl)alkanes.

heteropoly acids (hpa) and their salts have advantages as catalysts which make them both economically and environmentally attractive, strong br?nsted acidity, exhibiting fast reversible multi-electron redox transformations under rather mild conditions, very high solubility in polar solvents, fairly high thermal stability in the solid states, and efficient oxidizing ability, so that they are imp...

15 صفحه اول

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 4  issue 1

pages  32- 39

publication date 2018-02-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023