Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method

Authors

  • Mohammad Eshraghi Semiconductors, Materials and Energy Research Center (MERC)
  • Mohammad Zakeri Research Department of Ceramic, Materials and Energy Research Center (MERC)
Abstract:

Electrical resistivity (ER) is a main parameter in the melting processes of glasses. However, its measurement is difficult at high temperatures. In this study the electrical resistivity of different cordierite glass samples in the molten state was measured in the temperature range of 1100˚C to 1550 ˚C using the two-wire method. It was attempted to decrease the electrical resistivity of the glass by adding Na2O to the base glass. In one sample 0.5% wt Na2O was added and in another 1%. It was observed that the electrical resistivity of the glass decreased as temperature increased. Also, it was found that the electrical resistivity of cordierite glass decreases with the addition of Na2O. This was attributed to the high mobility of Na ions and mixed alkali effect.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Noncontact electrical resistivity measurement technique for molten metals

A noncontact technique of measuring the changes in electrical conductivity ~or resistivity! of conducting liquids is reported. The technique is based on a conducting drop that is levitated by the high-temperature electrostatic levitator in a high vacuum. This technique, which utilizes the principle of the asynchronous induction motor, measures the relative changes in torque as a function of tem...

full text

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

Detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ERT) method

Protection of water resources from contamination and detection of the contaminants and their treatments are among the essential issues in the management of water resources. In this work, the time-lapse electrical resistivity tomography (ERT) surveys were conducted along 7 longitudinal lines in the downstream of the Latian dam in Jajrood (Iran), in order to detect the contamination resulting fro...

full text

detection and determination of groundwater contamination plume using time-lapse electrical resistivity tomography (ert) method

protection of water resources from contamination and detection of the contaminants and their treatments are among the essential issues in the management of water resources. in this work, the time-lapse electrical resistivity tomography (ert) surveys were conducted along 7 longitudinal lines in the downstream of the latian dam in jajrood (iran), in order to detect the contamination resulting fro...

full text

assessment of the efficiency of s.p.g.c refineries using network dea

data envelopment analysis (dea) is a powerful tool for measuring relative efficiency of organizational units referred to as decision making units (dmus). in most cases dmus have network structures with internal linking activities. traditional dea models, however, consider dmus as black boxes with no regard to their linking activities and therefore do not provide decision makers with the reasons...

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 2  issue 1

pages  1- 4

publication date 2016-02-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023