Effect of Carbon Nanotube Geometries on Mechanical Properties of Nanocomposite Via Nanoscale Representative Volume Element

Authors

  • E Ghavanloo School of Mechanical Engineering, Shiraz University
  • F Moghaddam Department of Mechanical Engineering, Sharif University of Technology, Tehran
  • S.A Fazelzadeh School of Mechanical Engineering, Shiraz University
Abstract:

Predicting the effective elastic properties of carbon nanotube-reinforced nanocomposites is of great interest to many structural designers and engineers for improving material and configuration design in recent years. In this paper, a finite element model of a CNT composite has been developed using the Representative volume element (RVE) to evaluate the effective material properties of nanocomposites. Based on this model, the effects of geometrical characteristics such as the aspect ratio, orientation and volume fraction of the CNTs in conjunction with the interphase behavior on the mechanical properties of the nanocomposites are elucidated and the elastic properties of a complex polymeric nanofibrous structure are determined.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Evaluations of the effective material properties of carbon nanotube-based composites using a nanoscale representative volume element

Carbon nanotubes (CNTs) possess extremely high stiffness, strength and resilience, and may provide the ultimate reinforcing materials for the development of nanocomposites. In this paper, the effective mechanical properties of CNTbased composites are evaluated using a 3-D nanoscale representative volume element (RVE) based on continuum mechanics and using the finite element method (FEM). Formul...

full text

Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber

A novel mixing approach for achieving a good dispersion of multi-walled carbon nanotubes (MWCNTs) in ethylene- propylene diene monomer (EPDM) matrix has been investigated. In this approach EPDM was modified with vinyltrimethoxysilane (VTMS) during melt mixing. In addition the effect of MWCNT concentration on mechanical and rheological properties of modified EPDM has been studied. The formulated...

full text

Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties

In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...

full text

effect of oral presentation on development of l2 learners grammar

this experimental study has been conducted to test the effect of oral presentation on the development of l2 learners grammar. but this oral presentation is not merely a deductive instruction of grammatical points, in this presentation two hypotheses of krashen (input and low filter hypotheses), stevicks viewpoints on grammar explanation and correction and widdowsons opinion on limited use of l1...

15 صفحه اول

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

Study of Aspect Ratio Effect on Mechanical Properties Polymer/NanoComposite

Carbon nanotubes (CNTs) demonstrate unusually high stiffness, strength and resilience, and are therefore an ideal reinforcing material for nanocomposites. However, much work has to be done before the potentials of CNT-based composites can be fully realized.  Evaluating the effective material properties of such nanoscale materials is a very difficult tasks.  Simulations using molecular dynamics ...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 8  issue 3

pages  568- 577

publication date 2016-09-20

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023