Ecological quality assessment of Anzali wetland for heavy metals using heavy metals pollution index (HPI)
Authors
Abstract:
Background and Objective: Research has shown that assessing the toxicity and ecological risk of various types of pollutants, including heavy metals, using specific indicators, is indispensable in the ecological risk assessment of the ecosystem. Accordingly, the aim of this study was the assessment of the ecological effect of heavy metals presence (Pb, Zn, Cu, Cd and, As) in Anzali wetland using Heavy Metals Pollution Index (HPI). Materials and Methods: 43 water samples were collected from the eastern, western and central parts of Anzali wetland. The samples were transferred to the laboratory, and the preparation steps were carried out using the ASTM method. Concentration of the elements was determined by Inductively Coupled Plasma -Atomic Emission Spectroscopy (ICP-AES). According to the concentration of heavy metals in the water samples, the index (HPI) was calculated. The results of the HPI index were classified into three classes: low risk (<15), moderate (15-30), and high risk (> 30). Results: The numerical value of the HPI index was 3.59-23.3 with an average of 27.97, indicating the average level of heavy metals pollution in Anzali wetland. Indicator (HPI) in the eastern part of Anzali wetland and the Pirbazar area showed a severe contamination and ecological hazard of the heavy metals and in the Abkenar region showed an acceptable ecological status. Conclusion: Although the average of HPI in the whole Anzali wetland was modest, but at some stations, especially in the east of the wetland, the HPI indicates the occurrence of ecological hazards in the wetland in the event of uncontrolled entry of pollutants in future. Therefore, monitoring the sources of these pollutants entering to the wetland and controlling the ecological risks is necessary.
similar resources
Spatiotemporal assessment of some heavy metals in the Anzali International Wetland during 2007-2014
Background: Todays, water resources are affected by various factors such as organic materials, pathogens (bacterial and microbial agents), and minerals (including heavy metals). For this reason, continuously examining the spatiotemporal changes in environmental pollutants is one of the most critical components of water quality studies. Methods: The sampling of some heavy metals (Ni, Cd, Z...
full textPollution Assessment some of Heavy Metals in Water and Surface Sediments of Nasseri Wetland (Khorramshahr)
Background and Aim:This research was conducted of determining and comparing the heavy metals of zinc, iron, manganese, copper, nickel and vanadium in summer in waters and sediments of Naseri wetland in Khuzestan province, 2017. Material and Methods:Sampling of water and sediments from three areas of north, central and southern Naseri wetland was carried out in summer. In order to measure heavy...
full textEcological risk assessment of heavy metals from cement factory dust
Background: The release of metals from industrial factories is one of the most important sources of environmental pollution. The present study aimed to determine the concentration of heavy metals like cadmium (Cd), chromium (Cr), manganese (Mn), nickel (Ni), and lead (Pb) in dust around the cement factory. Methods: A total of 22 dust samples were collected from areas around the cement factory...
full textEvaluation of Heavy Metal Pollution in Anzali Wetland, Guilan, Iran
Background: Evaluation of heavy metals as toxic pollutants in environment has a significant importance in environmental pollution studies. surficial sediments of water resources have a high potential in releasing heavy metals to the upper water environment, hence sediment analysis presents guidelines to the authorities for monitoring the environmental systems. Methods: In this study, total an...
full textA Protocol for Pollution Index, Source Identification, and Spatial Analysis of Heavy Metals in Top Soil
Introduction: This study aimed to assess a good protocol for the contamination indexes, concentration, spatial analysis, and source identification of toxic metals in top soils. Materials and Methods: In the first step, samples were taken from top soil (30 cm) and the metals were extracted and detected with ICP-AES. In the second step, Enrichment Factor, Geoaccumulation Index, and Contamination...
full textMy Resources
Journal title
volume 12 issue 2
pages 173- 184
publication date 2019-09
By following a journal you will be notified via email when a new issue of this journal is published.
No Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023