Durable Glass Fiber Reinforced Concrete with Supplimentary Cementitious Materials
Authors
Abstract:
Durability of concrete structure in marine environments is a big issue for many decades due to chloride attack. Chloride penetrates the concrete structure and accelerates the corrosion process of reinforcement which decreases the life of those structures. Also shrinkage cracks in concrete play main role for chloride penetration through concrete surface. Many researchers tried to find easy and economical ways to obtain durable concrete in such marine region by use of supplementary cementitious material with proper curing regime. Also use of fiber in concrete may arrest the shrinkage cracks, decreasing the chloride permeability and increasing the durability of concrete. Durability of concrete with glass fiber and by replacement of cement and sand partially by supplementary cementitious material such as fly ash and pond ash, respectively is measured by conducting shrinkage test, bulk electrical resistivity, SEM and ultrasonic pulse velocity test. Based on various test result present research proposes an economical durable concrete with desired compressive strength by use of glass fiber and supplementary cementitious material.
similar resources
High Performance Fiber Reinforced Cementitious Composites as Durable Material for Concrete Structure Repair
This paper addresses the property requirements of repair materials for high durability performance for concrete structure repair. It is proposed that the high tensile strain capacity of High Performance Fiber Reinforced Cementitious Composites (HPFRCC) makes such materials particularly suitable for repair applications, provided that the fresh properties are also adaptable to those required in p...
full textExperimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC)
The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...
full textFlexure Toughness of Polymer Fiber-reinforced Cementitious Materials
In this article, the toughening effect of polymer fibers in cementitious materials is analyzed through an energy method. When a crack front encounters a fiber array, additional fracture work is required to overcome the barrier effect. The influences of fibers, matrix, and crack length on the critical energy release rate are collectively described by a single system parameter.
full textExperimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC)
The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...
full textComparative Study of Steel and Glass Fiber Reinforced Concrete Composites
Concrete is most widely used construction material in the world. Fiber reinforced concrete (FRC) is a concrete in which small and discontinuous fibers are dispersed uniformly. The fibers used in FRC may be of different materials like steel, G.I., carbon, glass, aramid, asbestos, polypropylene, jute etc. The addition of these fibers into concrete mass can dramatically increase the compressive st...
full textGlass Fibre Reinforced Concrete
Glass Fibre Reinforced Concrete is recent introduction in the field of concrete technology. The present day world is witnessing the construction of very challenging and difficult Civil Engineering Structures. Concrete being the most important and widely used material is called upon to possess very high strength and sufficient workability properties. Concrete the most widely used consrtuction ma...
full textMy Resources
Journal title
volume 30 issue 7
pages 964- 971
publication date 2017-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023