Dual-Band Evanescent-Mode Substrate Integrated Waveguide Band-pass Filter for WLAN Applications

Authors

  • Amir Nosrati School of Electrical and Computer Engineering, University of Tehran, Tehran, Iran
Abstract:

A new multi-layer substrate integrated waveguide (SIW) structure is developed to design dual-band evanescent-mode band-pass filters (BPFs). Two independent series LC circuits are implemented by incorporating metallic irises in the different layers of the structure. The combination of the metallic irises with capacitive-plates is embedded inside the SIW to independently excite two evanescent-mode resonance frequencies below the cut-off frequency of the structure. Two integrated series irises and capacitive-plates are incorporated in an antipodal configuration to minimize the coupling interference between them. A dual-band evanescent-mode band-pass filter is designed and characterized at 2.4GHz and 5.8GHz frequencies for Wireless Local Area Network (WLAN). The first resonance frequency of the filter is fixed at 2.4GHz (2400-2484MHz) and the second one is tuned at 5.2GHz (5150-5350MHz) to partially meet the standard IEEE 802.11 WLAN bandwidths and fully meet the WLAN frequencies. This approach demonstrates the miniaturized dual-band high quality- factor evanescent-mode band-pass filter. The structure is designed and simulated by taking into account of all fabrication aspects.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Design of Dual-Mode Substrate Integrated Waveguide Band-Pass Filters

Three dual-mode band-pass filters are presented in the present paper. The first filter is realized by dual-mode substrate integrated waveguide (SIW) cavity; the second is based on the integration of SIW cavity with electromagnetic band gap (EBG); and the third is based on the integration of SIW cavity with complementary split ring resonator (CSRR). The dual-mode SIW cavity is designed to have a...

full text

An independently reconfigurable dual-mode dual-band substrate integrated waveguide filter

In this paper, a novel perturbation approach for implementing the independently reconfigurable dual-mode dual-band substrate integrated waveguide (SIW) filter is proposed. Dual-frequency manipulation is achieved by adding perturbation via-holes (the first variable) and changing the lengths of the interference slot (the second variable) in each cavity. The independent control of the upper passba...

full text

WLAN Substrate Integrated Waveguide Filter with Novel Negative Coupling Structure

A fourth-degree Substrate Integrated Waveguide (SIW) crossed coupled band pass filter for WLAN band is designed by using a new negative coupling structure. It consists of two U shape microstrip lines on top and bottom planes with via holes at the center of them. This paper investigates the phase characteristics of negative and positive coupling structures and their effects. The design, fabricat...

full text

Wide Band Nonuniform Substrate Integrated Waveguide (NSIW) Wilkinson Power Divider

A new wideband Wilkinson Power Divider which use the nonuniform substrate integrated waveguide (NSIW) method is presented in this paper. This structure utilizes NSIWs instead of the uniform quarter wavelength SIWs in conventional Wilkinson power divider. The proposed structure is analyzed by odd and even mode analysis. The proper NSIW section widths can be extracted by using even mode while the...

full text

Novel compact single-band and dual-band bandpass filter based on one-third-mode substrate integrated waveguide

In this paper, a novel structure of One-Third-Mode Substrate Integrated Waveguide Resonator (OTMSIWR) is first proposed, which reduces about 65% size. Based on the OTMSIWR, a single-band bandpass filter (BPF) operats at 4.55GHz is designed. The single-band BPF has a wide and deep upper stopband. Further, a dual-band BPF using high mode technology based on the single-band filter is designed. The...

full text

wlan substrate integrated waveguide filter with novel negative coupling structure

a fourth-degree substrate integrated waveguide (siw) crossed coupled band pass filter for wlan band is designed by using a new negative coupling structure. it consists of two u shape microstrip lines on top and bottom planes with via holes at the center of them. this paper investigates the phase characteristics of negative and positive coupling structures and their effects. the design, fabricat...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 8  issue 2

pages  266- 276

publication date 2019-12-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023