Direct Blue 71 Removal from Aqueous Solutions by Adsorption on Pistachio Hull Waste: Equilibrium, Kinetic and Thermodynamic Studies

Authors

  • Biglari, Hamed Gonabad University of Medical Sciences, Gonabad, Iran
  • Javan, Nasibeh Zahedan University of Medical Sciences, Zahedan, Iran
  • Khosravi, Rasoul Birjand University of Medical Sciences, Birjand, Iran
  • Zarei, Amin Torbateheidarie University of Medical Sciences, Mashhad, Iran
Abstract:

Background and Purpose: Azo dyes including Direct Blue 71 (DB71) are toxic, mutagenic and carcinogenic contaminants in effluents of industries. This study aimed to investigate the adsorption of DB71 from aqueous solution onto pistachio hull waste (PHW) as a low-cost adsorbent. Materials and Methods: A series of experiments were performed via batch adsorption technique to examine the effect of the process variables such as contact time 0-210 minutes, initial dye concentration 10-100 mg/l, pH 2-12, adsorbent 0.05-1 g/l, and the processing temperature of 25, 40, and 50° C. The concentration changes of DB71 were measured using the colorimetric method by the spectrophotometer T80 ultraviolet/visible at the 587 nm wavelength. Moreover, The PHW was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, Freundlich and Langmuir isotherm model, pHpzc and Brunauer–Emmett–Teller (BET) surface area analysis. Results: Maximum adsorption capacity was 90.48 mg DB71 per 1 g adsorbent at pH 2, DB71 100 mg/l, temperature 50° C, and time 210 minutes. In general, by increasing the adsorbent dosage, time, and processing temperature, the removal efficiency was increased; however, incrementing pH and dye concentration had a reverse effect. Maximum BET specific surface and total pore volume on the adsorbent were 1.04 m2/g and 0.0002 cm3/g, respectively. The Freundlich isotherm (R2 = 0.9912) model fits the equilibrium data better than the Langmuir isotherm (R2 = 0.9024) model. The adsorption kinetic was found to be well described by the pseudo-second-order model. Thermodynamic analysis indicated that the adsorption process is a spontaneous and endothermic process. Conclusion: PHW can be used well as a low-cost surface adsorbent in the treatment of DB71 from aquatic environments.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

direct blue 71 removal from aqueous solutions by adsorption on pistachio hull waste: equilibrium, kinetic and thermodynamic studies

background and purpose: azo dyes including direct blue 71 (db71) are toxic, mutagenic and carcinogenic contaminants in effluents of industries. this study aimed to investigate the adsorption of db71 from aqueous solution onto pistachio hull waste (phw) as a low-cost adsorbent. materials and methods: a series of experiments were performed via batch adsorption technique to examine the effect of t...

full text

Adsorption of Malachite Green from Aqueous Solution by Nanozeolite Clinoptilolite: Equilibrium, Kinetic and Thermodynamic Studies

The object of present study was to examine the adsorption potential of nanozeolite clinoptilolite (CP) for the removal of malachite green (MG) from aqueous phase in a batch equilibrium system. SEM, EDX, XRF, XRD and FT-IR techniques of characterization of zeolite were applied. The effects of initial pH solution, adsorbent dose, temperature, contact time and initial MG concentration on adsorptio...

full text

Removal of phenol from aqueous solution by adsorption onto seashells: equilibrium, kinetic and thermodynamic studies

The efficacy of seashells as a new adsorbent for removal of phenol from aqueous solutions was studied by performing batch equilibrium tests under different operating parameters such as solution pH, adsorbent dose, initial phenol concentration, and temperature. The phenol removal efficiency remained unaffected when the initial pH of the phenol solution was in the range of 3–8. The amount of phen...

full text

Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies

Adsorption of Ce(III) from aqueous solution by amino phosphate modified nano TiO2 was investigated. Effects of pH of solution, adsorbent dose, contact time, initial metal concentration and temperature were examined. Experimental data were fitted well by the pseudo second order model. Adsorption was well described by Freundlich isotherm model with a maximum adsorption capacity of 25 mg g-1. Acco...

full text

Kinetic and thermodynamic studies of the removal of murexide from aqueous solutions on to activated carbon

The objective of this study was to assess the adsorption potential of activated carbon (AC) asan adsorbent for the removal of Murexide (Mu) from aqueous solutions. The influence of variablesparameters including pH, amount of adsorbent, sieve size of adsorbent, temperature and contact timeon Mu removal was studied. Following optimization of variables, the relation between concentrations ofdye re...

full text

Physical Chemistry Studies of Acid Dye Removal from Aqueous Media by Mesoporous Nano Composite: Adsorption Isotherm, Kinetic and Thermodynamic Studies

In this research, SBA-15/Polypyrrole (SBA-15/PPy) mesoporous nanocomposite was synthesized, characterized and applied for Acid Blue 62 (AB62) adsorption as a textile dye from aqueous solution. In order to evaluate the structural properties of synthesized adsorbent, FT-IR, FESEM and TEM images, XRD, and BET techniques were applied. Some parameters such as pH, dosage, and time which affect the ba...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 4  issue None

pages  55- 70

publication date 2016-06

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

No Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023