Determination of Residual Stress of PACVD Nanostructure TiN Coatings by GIXRD Method

Authors

  • A. Zolanvari b Department of Physics, Faculty of Science, Arak University, Arak, Iran.
  • Mahdi Raoufi Department of Materials Science and Engineering, Faculty of Engineering, Arak University, Arak 38156-8-8349, Iran
  • Majid zarezadeh a Department of Materials Science and Engineering, Faculty of Engineering, Arak University, Arak 38156-8-8349, Iran.
Abstract:

In this study, thin layers of titanium nitride (TiN) were deposited on H13 steel substrates at different duty cycles and temperature of 520 ˚C using plasma assisted chemical vapor deposition (PACVD). Uniaxial residual stress was calculated by X-ray diffraction (XRD) and Sin2 Ψ method. Then the residual stress of the samples were measured by Grazing Incidence X-ray Diffraction (GIXRD) method and lattice parameter diagrams versus f(Ψ). Depth of penetration and texture coefficient in the samples were also evaluated. The surface morphology was examined using field-emission gun scanning electron microscope (FESEM) and the relationship of the stress and micro hardness test was also expressed. The results showed that by reducing duty cycles, residual stress decreases as well as with more changes of the lattice parameter, more changes of residual stress will be seen. Also, the microstructure result was in good agreement with theory and clearly displayed spherical morphology and uniform distribution of the created phases

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Nanohardness and Residual Stress in TiN Coatings

TiN films were prepared by the Cathodic arc evaporation deposition method under different negative substrate bias. AFM image analyses show that the growth mode of biased coatings changes from 3D island to lateral when the negative bias potential is increased. Nanohardness of the thin films was measured by nanoindentation, and residual stress was determined using Grazing incidence X ray diffract...

full text

Investigation of Important Parameters in Residual Stress Determination in Isotropic Plates and Laminated Composites by Slitting Method

In the slitting method, a small width slit is created incrementally through the thickness of the stressed specimen and the released strains in each increment are recorded by a strain gauge. Compliance coefficients relate the measured strains to the residual stresses. This paper investigates the important parameters influencing the calculation of compliance coefficients for isotropic plates and ...

full text

multiwavelength pectrophotometric determination of stability constants of 4-(2– thiazolylazo) resorcinol (tar) with la3+, y3+ and th4+ in organic-water mixed solvents by chemometrics method & simultaneous spectrophotometric determination of lead, copper and nickel using xylenol orange by partial least squares calibration method

تشکیل کمپلکس های tarبا یون های لانتانیم, ایتریم و توریم در دمای 25 درجه، قدرت یونی ثابت 0.1 مولار و در ph ثابت در مخلوط حلال های اتانول – آب و استونیتریل – آب با استفاده از روش های اسپکتروفوتومتری مورد بحث و بررسی قرار گرفت. داده های اسپکتروفوتومتری با استفاده از نرم افزار squad پردازش شدند تا ثابت های تشکیل کمپلکس اندیکاتور – فلز را محاسبه کند. نتایج نشان می دهد که درصد حلال آلی در مخلوط حلال ...

15 صفحه اول

An Analytical Solution for Inverse Determination of Residual Stress Field

An analytical solution is presented that reconstructs residual stress field from limited and incomplete data.  The inverse problem of reconstructing residual stresses is solved using an appropriate form of the airy stress function.  This function is chosen to satisfy the stress equilibrium equations together with the boundary conditions for a domain within a convex polygon.  The analytical solu...

full text

Measuring of Residual Stress in TIG Welding of the 304 Stainless Steel by Ultrasonic Method

In this research, the effect of different welding parameters on residual stress and microstructure of the weld region, as well as the comparison of two methods of measuring residual stress using critical fracture longitudinal wave method and preformation method have been investigated. For this purpose, the taguchi DOE methodology is used as a statistical method to optimize four parameters of pu...

full text

A Magnetic Method for the Determination of Residual Stress

A magnetlc method for the measurement of residual longitudinol stress i n the outer portions of cylindrical bars is developed and applaed to nickel and steel. I t involves measurement of the reversible effective permeobili ty over a range of frequency of the applted alternating field. Special composite specimens, in which ony desired level of residual stress con be produced, serve as idealized ...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 6  issue 3

pages  3- 12

publication date 2018-11-05

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023