Design Requirements for Plate Girders with Bolted Transverse Stiffeners (TECHNICAL NOTE)
author
Abstract:
Web of plate girders in bridges are usually reinforced by welded transverse stiffeners inorder to improve their shear capacity. Due to problems associated with field welding and fatigue,welded stiffeners are not suitable for retrofitting existing bridges. Bolted stiffeners are a practicalalternative for strengthening girders that are expected to experience shear stresses in excess of theirdesign shear capacity. This paper presents the results of an analytical study into behavior of plategirders with bolted transverse stiffeners. Based on this study new requirements are developed fordesign of such girders.
similar resources
Design Requirements for Plate Girders with Bolted Transverse Stiffeners
The web of plate girders in bridges are usually reinforced by welded transverse stiffeners in order to improve their shear capacity.Due to problems associated with field welding and fatigue, welded stiffeners are not suitable for retrofitting existing bridges. Bolted stiffeners are a practical alternative for strengthening girders that are expected to experience shear stress in excess of their ...
full textModel Studies on Plate Girders
Tests on eighteen small scale models which simulate the elastic and post-buckling behaviour of plate girders when subjected to shear loading are reported and discussed. Themodels were fabricated of steel and Araldite; the major aim was to assess whether small scale models can be employed to study shear buckling problems. A secondary object was to examine whether araldite could be used for predi...
full textTwin Plate Weir: A Flow Measuring Device (TECHNICAL NOTE)
For efficient use of water, accurate measurement of flow in (field/laboratory) channels is required for many water resource projects. The present work is aimed to study the flow characteristics of a twin plate weir (two sharp-crested plates are placed one behind the other at some distance) under free and submerged flow conditions. Experiments are performed with four spacing of the twin plate we...
full textFatigue Strength of Fillet-Welded Transverse Stiffeners with Undercuts
Presently, wrapping of the welds at the ends of stiffeners is not done to avoid the undercutting of the stiffener corners and the attendant weld repair. The fatigue performance of stiffeners with undercuts was evaluated in a factorial design fatigue experiment. Undercuts at the flange edge and filling of the stiffener cope with the fillet weld were also evaluated. The undercuts did not influenc...
full textRequirements analysis for socio-technical system design
Few methods address analysis of socio-technical system requirements. This paper describes a method for analysing dependencies between users/stakeholders agents and computer systems in the operational environment. Domain scenarios describing the system and its context are used to create an environment model. A method is proposed to define business organisational relationships by operationalising...
full textNumerical Analysis of End Plate Bolted Connection with Corrugated Beam
Steel extended end plate bolted connections are recommended to be widely utilized in special moment-resisting frame subjected to monotonic loading. Improper design of steel beam to column connection can lead to the collapse and fatality of structures. Therefore comprehensive research studies of beam to column connection design should be carried out. Also the performance and effect of corrugated...
full textMy Resources
Journal title
volume 18 issue 1
pages 21- 26
publication date 2005-04-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023