Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE)
Authors
Abstract:
In this paper, an Ultra High Frequency (UHF) base band processor for a passive tag is presented. It proposes a Radio Frequency Identification (RFID) tag digital base band architecture which is compatible with the EPC C C2/ISO18000-6B protocol. Several design approaches such as clock gating technique, clock strobe design and clock management are used. In order to reduce the area Decimal Matrix Code (DMC) technique is used. The digital base band processor has been simulated and implemented using Xilinx platform. The complete design is verified and tested on Spartan-6 Field Programmable Gate Array (FPGA) board. The performance of system is measured in terms of power. The synthesis result shows that, the power required for complete design of digital baseband processor is 5mW on a supply voltage of 1.2 V.
similar resources
Field Programmable Gate Array–based Implementation of an Improved Algorithm for Objects Distance Measurement (TECHNICAL NOTE)
In this work, the design of a low-cost, field programmable gate array (FPGA)-based digital hardware platform that implements image processing algorithms for real-time distance measurement is presented. Using embedded development kit (EDK) tools from Xilinx, the system is developed on a spartan3 / xc3s400, one of the common and low cost field programmable gate arrays from the Xilinx Spartan fami...
full textField Programmable Gate Array Implementation of Active Control Laws for Multi-mode Vibration Damping
This paper investigate the possibility and effectiveness of multi-mode vibration control of a plate through real-time FPGA (Field Programmable Gate Array) implementation. This type of embedded system offers true parallel and high throughput computation abilities. The control object is an aluminum panel, clamped to a Perspex box’s upper side. Two types of control laws are studied. The first belo...
full textImplementation of a Clifford Algebra Co-Processor Design on a Field Programmable Gate Array
We present the design of a Clifford algebra co-processor and its implementation on a Field Programmable Gate Array (FPGA). To the best of our knowledge this is the first such design developed. The design is scalable in both the Clifford algebra dimension and the bit width of the numerical factors. Both aspects are only limited by the hardware resources. Furthermore, the signature of the underly...
full textA Field Programmable Gate Array Spectrometer for Radio Astronomy
We describe the technological concept and the first–light results of a 1024-channel spectrometer based on field programmable gate array (FPGA) hardware. This spectrometer is the prototype for the seven beam L-band receiver to be installed at the Effelsberg 100-m telescope in autumn 2005. Using " of-the-shelf " hardware and software products, we designed and constructed an extremely flexible Fas...
full textDesign, implementation, and evaluation of a field-programmable gate array-based wireless local area network synchronizer
Synchronization is a critical operation required by majority of wireless receivers. This paper presents the design, implementation, and evaluation of an orthogonal frequency-division multiplexing baseband packet synchronizer deployed on a field-programmable gate array (FPGA). Packet detection, carrier frequency offset estimation/correction, and time synchronization are all performed in the time...
full textMy Resources
Journal title
volume 30 issue 1
pages 127- 133
publication date 2017-01-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023