Comparing thermal enhancement of Ag-water and SiO2-water nanofluids over an isothermal stretching sheet with suction or injection

Authors

  • Afshin Ghanbarzadeh Department of Mechanical Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran
  • Aminreza Noghrehabadi Department of Mechanical Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran
  • Mehdi Ghalambaz Engineering Part of Iman Madar Naslaha Co. (IMEN), Ahvaz, Iran
  • Mohammad Ghalambaz Department of Mechanical Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran
Abstract:

In the present paper, the flow and heat transfer of two types of nanofluids, namely, silver-water and silicon dioxide-water, were theoretically analyzed over an isothermal continues stretching sheet. To this purpose, the governing partial differential equations were converted to a set of nonlinear differential equations using similarity transforms and were then analytically solved. It was found that the magnitude of velocity profiles in the case of SiO2-water nanofluid was higher than that of Ag-water nanofluid. The results showed that the increase of nanoparticle volume fraction increased the non-dimensional temperature and thickness of thermal boundary layer. In both cases of silver and silicon dioxide, increase of nanoparticle volume fraction increased the reduced Nusselt number and shear stress. It was also demonstrated that the increase of the reduced Nusselt number was higher for silicon dioxide nanoparticles than silver nanoparticles. However, the thermal conductivity of silver was much higher than that of silicon dioxide. 

Download for Free

Sign up for free to access the full text

Already have an account?login

similar resources

comparing thermal enhancement of ag-water and sio2-water nanofluids over an isothermal stretching sheet with suction or injection

in the present paper, the flow and heat transfer of two types of nanofluids, namely, silver-water and silicon dioxide-water, were theoretically analyzed over an isothermal continues stretching sheet. to this purpose, the governing partial differential equations were converted to a set of nonlinear differential equations using similarity transforms and were then analytically solved. it was found...

full text

Unsteady Stagnation Point Flow and Heat Transfer over a Stretching/Shrinking Sheet with Suction or Injection

The unsteady stagnation point flow and heat transfer over a stretching/shrinking sheet with suction/injection is studied. The governing partial differential equations are converted into nonlinear ordinary differential equations using a similarity transformation and solved numerically. Both stretching and shrinking cases are considered. Results for the skin friction coefficient, local Nusselt nu...

full text

Flow Over an Exponentially Stretching Porous Sheet with Cross-diffusion Effects and Convective Thermal Conditions

This article investigates the influence of cross-diffusion on the viscous fluid flow over a porous sheet stretching exponentially by applying the convective thermal conditions. Velocity slip at the boundary is considered. The numerical solutions to the governing equations are evaluated using successive linearisation procedure and Chebyshev collocation method. It is observed from this study that...

full text

Unsteady Hydromagnetic Flow of Eyring-Powell Nanofluid over an Inclined Permeable Stretching Sheet with Joule Heating and Thermal Radiation

The present analysis deals with an unsteady magnetohydrodynamic flow of Eyring-Powell nanofluid over an inclined permeable stretching sheet. Effects of thermal radiation, Joule heating, and chemical reaction are considered. The effects of Brownian motion and thermophoresis on the flow over the permeable stretching sheet are discussed. Using Runge-Kutta fourth-order along with shooting technique...

full text

Heat Transfer in a Porous Medium over a Stretching Surface with Injection or Suction and with Different Thermal Boundary Conditions

Heat transfer in a porous medium over a stretching surface with injection or suction is studied. Two standard kinds of thermal boundary conditions are used for the surface. Isothermal and Iso-flux boundary conditions for the stretching surface are two standard boundary conditions which are used and discussed in the present work. Brinkman model is used for the medium. The governing equations are...

full text

Thermal Conductivity of Cu and Al-Water Nanofluids

Nanofluids are suspensions of nanoparticles in the base fluids, a new challenge for thermal sciences provided by nanotechnology. In this paper, the tested fluids are prepared by dispersing the Al and Cu into water at three different concentrations such as 500, 1000 and 2000 ppm. Thermal conductivities of these fluids are measured experimentally by thermal property analyzer i.e. KD2 Pro by using...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 2  issue 1

pages  37- 49

publication date 2012-09-11

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023