CoFe2O4 nanoparticles grafted multi-walled carbon nanotubes coupled with surfactant-enhanced spectrofluorimetry for determination of ofloxacin in human plasma

Authors

  • Kamyar Pourghazi Department of Research and Development, Darupakhsh Pharmaceutical Co., Tehran, Iran
Abstract:

An efficient and simple magnetic solid phase extraction based on the use of CoFe3O4 nanoparticles grafted multi-walled carbon nanotubes (MWCNTs) as adsorbent coupled with surfactant enhanced spectrofluorimetric detection was developed for determination of ofloxacin from biological samples. The adsorbent uses the advantages of both magnetic nanoparticles (i.e., magnetic separation) and MWCNTs (i.e., high adsorption capacity). The main factors affecting the quantitative recovery including SDS concentration, pH, extraction and desorption times, adsorbent amount, and desorption conditions were investigated in detail. Under the optimized conditions, the calibration curves were linear over a wide concentration range of 100-750 ng mL-1 with detection limit (LOD) of 23 ng mL-1. The relative standard deviation (RSD %) of 3.3% for concentration of 250 ng mL-1, n = 5 and the preconcentration factor of 93 were obtained. Finally, the proposed method was successfully applied to the extraction and preconcentration of ofloxacin in human plasma samples.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Ultrasound Assisted Surfactant Enhanced Emulsification Microextraction and Spectrofluorimetry for Determination of Oxadiazon in Agricultural Water Samples

In this work, an environmentally friendly sample pre-treatment method, Ultrasound Assisted Surfactant Enhanced Emulsification Microextraction (UASEME) followed with spectrofluorimetry was performed for determination of oxadiazon residues in water samples. After the determination of the most suitable extraction solvent and its volume, other parameters such as type and concentration of surfac...

full text

Fe2O3 Nanoparticles Wrapped in Multi-walled Carbon Nanotubes With Enhanced Lithium Storage Capability

We have designed a novel hybrid nanostructure by coating Fe₂O₃ nanoparticles with multi-walled carbon nanotubes to enhance the lithium storage capability of Fe₂O₃. The strategy to prepare Fe₂O₃@MWCNTs involves the synthesis of Fe nanoparticles wrapped in MWCNTs, followed by the oxidation of Fe nanoparticles under carbon dioxide. When used as the anode in a Li-ion battery, this hybrid material (...

full text

Plasma Treated Multi-Walled Carbon Nanotubes (MWCNTs) for Epoxy Nanocomposites

Plasma nanocoating of allylamine were deposited on the surfaces of multi-walled carbon nanotubes (MWCNTs) to provide desirable functionalities and thus to tailor the surface characteristics of MWCNTs for improved dispersion and interfacial adhesion in epoxy matrices. Plasma nanocoated MWCNTs were characterized using scanning electron microscopy (SEM), high-resolution transmission electron micro...

full text

Optoelectronic property modeling of carbon nanotubes grafted with gold nanoparticles.

A three-dimensional (3D) electrodynamic model is built using the finite-difference time-domain (FDTD) method to investigate the optical response of carbon nanotubes grafted with gold nanoparticles. Theoretical characterizations suggest an anisotropic response, in line with previously observed absorption peaks of such systems in the optical range. An investigation of geometric and wavelength dep...

full text

Spectroscopy of single-walled carbon nanotubes in aqueous surfactant dispersion

Optical studies of single-walled carbon nanotubes (SWNTs) dispersed in aqueous surfactant suspensions have made significant progress since the discovery of their bright band-gap fluorescence in the near-infrared region [1]. In this article we report the systematic investigation of the effect of chemical purification and oxidation on the spectroscopic properties of SWNTs. The SWNTs samples we pr...

full text

Surfactant-free dielectrophoretic deposition of multi-walled carbon nanotubes with tunable deposition density

The effects of AC field strength and AC frequency on the density of dielectrophoretically deposited multi-walled carbon nanotubes (MWCNTs) were investigated and explained in terms of existing theory. We show that while both parameters can be used to control deposition density, the experimentally observed frequency trend can not be explained by the theoretical Clausius–Mossotti factors. We demon...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 3  issue 1

pages  17- 23

publication date 2018-01-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023