Capacitor Placement in Distorted Distribution Network Subject to Wind and Load Uncertainty
Authors
Abstract:
Utilizing capacitor banks is very conventional in distribution network in order for local compensation of reactive power. This will be more important considering uncertainties including wind generation and loads uncertainty. Harmonics and non-linear loads are other challenges in power system which complicates the capacitor placement problem. Thus, uncertainty and network harmonics have been considered in this paper, simultaneously. Capacitor placement has been proposed as a probabilistic harmonic problem with different objectives and technical constraints in the capacitor placement problem. Minimizing power and energy loss and capacitor prices are considered as objectives. Particle Swarm Optimization (PSO) and Differential Evolution (DE) algorithms have been used to solve the optimization problem. Loads are subjected to uncertainty with normal probabilistic distribution function (PDF). Auto Regressive and Moving Average (ARMA) time series and two point estimate method have also been utilized to simulate the wind speed and to perform the probabilistic load flow, respectively. Finally, the proposed method has been implemented on standard distorted test cases in different scenarios. Monte Carlo Simulation (MCS) has also been used to verify the probabilistic harmonic power flow. Simulation results demonstrate the efficiency of the proposed method.
similar resources
Optimal capacitor placement in distorted distribution networks with different load models using Penalty Free Genetic Algorithm
Genetic Algorithm with special constraint handling procedure is proposed for the discrete optimization problem of capacitor placement and sizing in distribution system for cost reduction and power quality improvement. We use gene encoding that enables simple integer representation of possible different number of capacitors of various standard sizes to be placed on a bus. A pair-wise comparison ...
full textNetwork Reconfiguration for Load Balancing in Distribution System with Distributed Generation and Capacitor Placement
Abstract—This paper presents an efficient algorithm for optimization of radial distribution systems by a network reconfiguration to balance feeder loads and eliminate overload conditions. The system load-balancing index is used to determine the loading conditions of the system and maximum system loading capacity. The index value has to be minimum in the optimal network reconfiguration of load b...
full textSimultaneous placement of DG and capacitor in distribution network
In this study, the planning problem concerned with simultaneous placement of distribution generation (DG) and capacitor bank in the distribution network is investigated from a local distribution company’s (DISCO’s) viewpoint based on minimum total cost over the planning period and applying genetic algorithm (GA). The cost terms of the objective function include risk cost of load not supplied of...
full textOptimal Sizing and Location of Capacitor Banks in Distorted Distribution Networks with Distributed Wind Generation
In this paper, a modified simulated annealing technique is proposed for simultaneous improvement of power quality and optimal placement and sizing of fixed capacitor banks in a modern distribution network. The later is supplying a mix of linear and nonlinear loads imposing voltage and current harmonics. Besides, they include integrated variable-speed wind turbines as distributed generation. The...
full textApplication of Multi Objective HFAPSO algorithm for Simultaneous Placement of DG, Capacitor and Protective Device in Radial Distribution Network
In this paper, simultaneous placement of distributed generation, capacitor bank and protective devices are utilized to improve the efficiency of the distribution network. The objectives of the problem are reduction of active and reactive power losses, improvement of voltage profile and reliability indices and increasing distribution companies’ profit. The combination of firefly algorithm, parti...
full textOptimal Capacitor Placement in Distribution Feeders
Optimal capacitor allocation in distribution systems has been studied for a long times. It is an optimization problem which has an objective to define the optimal sizes and locations of capacitors to be installed. In this works, an overview of capacitor placement problem in distribution systems is briefly introduced. The objective functions and constraints of the problem are listed and the meth...
full textMy Resources
Journal title
volume 4 issue 2
pages 153- 164
publication date 2016-12-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023