Biodiesel Production from Chicken Fat Using Nano-calcium Oxide Catalyst and Improving the Fuel Properties via Blending with Diesel
Authors
Abstract:
In this research, biodiesel was produced using chicken fat in the presence of calcium oxide nano-catalyst. To do so, the effect of various parameters like temperature, reaction time, catalyst amount and methanol to oil ratio was investigated on the biodiesel production. The results showed that the best conditions for biodiesel production were obtained such as the temperature of 65oC, methanol to oil ratio of 1:9, the catalyst amount of 1 wt.% and reaction time of 5 h which in these conditions the biodiesel efficiency was determined 94.4%. Then, for improvement of fuel properties, they were mixed with diesel in different ratios (B25, B50, and B75) and their properties such as flash point, cloud point, pour point, kinematic viscosity and density were analyzed according to international standards. The results showed that the mixture ratio of B75 and B100 had density and viscosity in the range of standard. Additionally, this fuel should not be used in cold weather since its pour point is greater than zero.
similar resources
Production of Biodiesel from Roasted Chicken Fat and Methanol: Free Catalyst
Transesterification reactions free of catalyst between roasted chicken fat with methanol were carried out in a batch reactor in order to produce biodiesel to temperatures from 120°C to 140°C. Parameters related to the transesterification reactions, including temperature, time and the molar ratio of chicken fat to methanol also investigated. The maximum yield of the reaction was of 98% under con...
full textCombination of biodiesel-ethanol-diesel fuel blend and SCR catalyst assembly to reduce emissions from a heavy-duty diesel engine.
In this study, the efforts to reduce NOx and particulate matter (PM) emissions from a diesel engine using both ethanol-selective catalytic reduction (SCR) of NOx over an Ag/Al2O3 catalyst and a biodiesel-ethanol-diesel fuel blend (BE-diesel) on an engine bench test are discussed. Compared with diesel fuel, use of BE-diesel increased PM emissions by 14% due to the increase in the soluble organic...
full textPhysico-Chemical Properties of the Biodiesel Extracted From Rubber Seed Oil Using Solid Metal Oxide Catalysts
Physicochemical properties of the commercially procured rubber seed oil (RSO) were studied to evaluate its potential as viable feedstock for biodiesel production. The procured rubber seed oil were characterized for acid value, saponification value, free fatty acid, flash point, kinematic viscosity, and refractive indices using standard methods. Results indicate that the procured rubber seed oil...
full textThe effect of a novel hybrid nano-catalyst in diesel-biodiesel fuel blends on the energy balance of a diesel engine
In internal combustion engines, only about a third of the total fuel input energy is converted into useful work. If the energy rejected into the cooling system and the exhaust gases could be recovered instead and put into useful work, fuel economy would have been substantially improved. The main aim of this research paper was to evaluate the effects of the hybrid nano-catalyst containing ce...
full textThe effect of a novel hybrid nano-catalyst in diesel-biodiesel fuel blends on the energy balance of a diesel engine
In internal combustion engines, only about a third of the total fuel input energy is converted into useful work. If the energy rejected into the cooling system and the exhaust gases could be recovered instead and put into useful work, fuel economy would have been substantially improved. The main aim of this research paper was to evaluate the effects of the hybrid nano-catalyst containing ce...
full textCharacteristics of carbonyl compounds emission from a diesel-engine using biodiesel–ethanol–diesel as fuel
Characteristics of carbonyl compounds (carbonyls) emissions from biodiesel–ethanol–diesel (BE–diesel) were investigated in a Commins-4B diesel engine and compared with those from fossil diesel. Acetaldehyde was the most abundant carbonyls in the exhaust, followed by formaldehyde, acetone, propionaldehyde and benzaldehyde. Apliphatic carbonyls emitted from BE–diesel were higher than those from d...
full textMy Resources
Journal title
volume 6 issue 3
pages 521- 529
publication date 2018-09-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023