Behavior of Castellated I Beams Encased in Concrete
author
Abstract:
Five methods are introduced for design of castellated I beams encased in concrete. One of the methods, plastic analysis, is thoroughly explained and the relevant equations are developed. Eight castellated I beams encased in concrete are made and tested. The theoretical design methods are all compared with the test results and the safety factor for each method is calculated. The results show that the plastic method of analysis and design is the most economical, which also gives a reasonable safety factor against beam failure
similar resources
Ultimate Behavior of Composite Castellated Beams under Vertical Loads
The aim of this paper is to carry out extensive numerical investigations about the effect of various parameters on both buckling loads and ultimate behavior of continuous partially composite castellated beams under vertical loads. Efficient nonlinear 3D Finite Element Model using ABAQUS software is developed. The initial geometric imperfection and material nonlinearities were carefully consider...
full textFhwa / in / Jhrp - 88 / 6 - 1 Structural Behavior of High Strength Concrete Prestressed I - Beams
This report deals with the evaluation of the ultimate behavior of AASHTO I-beams with concrete strengths up to 9000 psi. The relevant AASHTO and IDOH design specifications are thoroughly evaluated based on the results of this research. The findings of this study remark the many beneficial implications of the use of higher strength concrete in precast prestressed AASHTO I-beams. Higher strength ...
full textMy Resources
Journal title
volume 24 issue 1
pages 121- 134
publication date 2005-07
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023