Ballistic Testing and Simulation of Co-continuous Ceramic Composite for Body Armour

Authors

  • A. S. Prasanth Department of Mechanical Engineering, PSG College of Technology, Coimbatore, India
  • R. Ramesh Department of Mechanical Engineering, PSG Institute of Technology and Applied Research, Coimbatore, India
Abstract:

Co-Continuous Ceramic Composites, referred to as C4, have bi-continuous, interconnected and interpenetrating phases of a metal and ceramic. This bestows such composites with a higher strength to weight ratio compared with traditional composites. In this research work, a C4 composite of AA5083/SiC is fabricated for personal body armour, using gravity infiltration technique. A numerical simulation model of the C4 specimen is developed. This finite element model is utilized to simulate the DoP of a subsonic bullet into the C4 and is estimated as 1.47 mm. The C4 specimen is then, subjected to ballistic tests. A medium velocity projectile with a rated velocity of 326 m/s is used to impact the C4 specimen. The ballistic tests validate the numerical simulation with a DoP of 1.5 mm. Visual inspection reveals brittle cracks and interfacial debonding in the impacted C4. The results indicate that, such composites can potentially be utilized as low cost body armour.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Ballistic Impact on Ceramic/aramid Armour Systems

The ballistic performance of the lightweight armour systems was examined to obtain an estimate for the V50 and the global damage of the composite plates. All estimates were performed by varying the thickness of ceramic tiles, while maintaining equal areal density of the system. Simulation predictions and trial results is demonstrated both in terms of deformation and damage of the laminates and ...

full text

Simulation of Ballistic Impact on Composite Panels

Ballistic impact on composite panels is studied in this work both experimentally and computationally. The purpose was to develop computational methods to analyze a high speed jet engine fragment impacting on composite targets. 12 inch by 12 inch laminated panels with 8, 16, and 32 plies and the standard +-45, 0 /90 degree stacking sequences were considered. With the nominal ply thickness of 0.0...

full text

simulation and design of electronic processing circuit for restaurants e-procurement system

the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...

15 صفحه اول

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Mineralogy, physico-chemical properties and industrial testing of ArazGoney kaolin deposit for ceramic and tile industry

Arazgoni Kaolin deposit is located in East Azarbaijan Province, about 18 km south of Qara Aghaj, the center of Charoymaq city. The area under investigation, in the geological zoning of Iran, is a part of the Urmia-Dokhtar volcanic-plutonic belt. Most of the study area is composed of volcanic rocks with Oligo-Miocene dacite-andesitic composition which have been strongly altered by hydrothermal a...

full text

impact behavior of ceramic-metal armour by al2o3-nano sic nano composite

abstract : alumina (al 2 o 3 ) is one of the most practical ceramics used in making ceramic-metal armours. to improve the properties of alumina, some other materials are added to it. in this paper, sic material as nano powder is added to alumina, and four armour samples of this new ceramic with different volume fractions (v.f. ) including 0%, 5%, 10% and 15% of sic particles are made. then, the...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 33  issue 9

pages  1792- 1796

publication date 2020-09-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023