Artificial intelligence investigation of three silicates bioceramics-magnetite bio-nanocomposite: Hyperthermia and biomedical applications
Authors
Abstract:
Objective(s): Bioactive silicate ceramics have favorable features for applying as off-the-shelf bone and artificial tissue. Calcium silicate can enhance the generation of an immediate bond with host bone without an intervening rough surface in the bone layer. However, the silicate bioceramics have some drawback regarding their mechanical properties and chemical stabilities. Materials and Methods: In this study, magnetite nanoparticles (MNPs) as reinforcement were added to the three silicate bioceramics to investigate the physical and mechanical properties as well as their magnetic behavior as a case study and compare with other calcium silicate nanocomposite which are excellent candidates for hyperthermia applications. Then the artificial neural network (ANN) applied to the previous data to predict the mechanical and biological behavior of the bio-nanocomposite as output parameters. A predicted model was enhanced using ANN to measure the optimum size and reinforcement amount of the magnetite bio-nanocomposite. The results of the fabricated bio-nanocomposite were extracted experimentally corresponding to different MNPs weight fractions compared to the predicted model. Results: The X-ray diffraction (XRD), scan electron microscopy (SEM) technique were used to compare the porosity and porous tissue microstructure. Thereafter, an analytical solution is presented to express explicitly the physical and mechanical responses of the bulk/scaffold bio-nanocomposite. Conclusion: The obtained results showed the potential application of these calculations and analyses in a wide range of numerical studies. The comparison presented within the test and predicted values showed that the modeling outcomes were close to testing values.
similar resources
Mechanical performance of three-dimensional bio- nanocomposite scaffolds designed with digital light processing for biomedical applications
Introduction: The need for biocompatible and bioactive scaffolds to accelerate the regeneration and repair of fractured bones has been considered for bone tissue engineering applications during recent decades. The new methods were developed to produce scaffolds to improve the tissue quality, size of cavities, control the porosity and increase the scaffold compressive strength u...
full textNanocomposite hydrogels for biomedical applications.
Hydrogels mimic native tissue microenvironment due to their porous and hydrated molecular structure. An emerging approach to reinforce polymeric hydrogels and to include multiple functionalities focuses on incorporating nanoparticles within the hydrogel network. A wide range of nanoparticles, such as carbon-based, polymeric, ceramic, and metallic nanomaterials can be integrated within the hydro...
full textInvestigation of magnetite Fe3O4 nanoparticles for magnetic hyperthermia
The paper presents the investigation of magnetic nanoparticles (MNPs) dedicated to hyperthermia application. The crystal structure and size distributions have been determined by means of transmission electron microscope (TEM) and X-ray diffraction (XRD). Magnetic properties of the nanoparticles were tested by Mössbauer spectroscopy together with calorimetric experiments. The Mössbauer spectrosc...
full textNanocomposite flexible pressure sensor for biomedical applications
A new approach for the fabrication of flexible pressure sensors based on aligned carbon nanotubes (A-CNTs) is described in this paper. The technology is suitable for blood pressure sensors that can be attached to a stent-graft and deployed during an endovascular aneurysm repair (EVAR) procedure. Given the specifications of EVAR, the device should be foldable (extremely flexible) and characteriz...
full textTailored and Functionalized Magnetite Particles for Biomedical and Industrial Applications
full text
Applications in Bio-informatics and Biomedical Engineering
In this paper, an overview of the main topics presented in the special session of bioinformatics and biomedical engineering is presented. Bioinformatics consists of two subfields: the development of computational tools and databases, and the application of these tools and databases in generating biological knowledge to better understand living systems, being the main subject genomics and proteo...
full textMy Resources
Journal title
volume 5 issue 3
pages 163- 171
publication date 2018-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023