Applicability improvement and hysteresis current control method simplification in shunt active filters
Authors
Abstract:
Hysteresis current control method is vastly used in PWM inverters because of simplicity in performance, fast control response and good ability in limiting peak current. However, switching frequency in hysteresis current control method with fixed bandwidth has large variation during a cycle and therefore causes non-optimal current ripple generation in output current. One of basic problems in implementing hysteresis current control is its variable switching frequency that causes sound noise and increase in inverter losses and also high frequency current components injection to the source current. In this paper, in addition to the calculation of variable hysteresis bandwidth equation that fixes frequency switching, also other problems can be solved by removing the derivative part. Here, a shunt active filter has been used for removing the current harmonic components generated by non-linear loads. Proposed method is simple to perform and reliable, and also has been simulated in MATHLAB software environment
similar resources
A Novel Reference Current Calculation Method for Shunt Active Power Filters using a Recursive Algebraic Approach
This paper presents a novel method to calculate the reference source current and the referencecompensating current for shunt active power filters (SAPFs). This method first calculates theamplitude and phase of the fundamental load current from a recursive algebraic approach blockbefore calculating the displacement power factor. Next, the amplitude of the reference mains currentis computed with ...
full textHysteresis Control for Current Harmonics Suppression Using Shunt Active Filter
Recently wide spread of power electronic equipment has caused an increase of the harmonic disturbances in the power systems. The nonlinear loads draw harmonic and reactive power components of current from ac mains. Current harmonics generated by nonlinear loads such as adjustable speed drives, static power supplies and UPS. Thus a perfect compensator is required to avoid the consequences due to...
full textA Novel Fuzzy Variable-Band Hysteresis Current Controller For Shunt Active Power Filters
This paper presents a novel fuzzy control scheme applied to shunt active power filters for harmonic and reactive power compensation. A TSK type fuzzy logic controller is proposed for APF reference current generation. To control the maximum switching frequency of the converter within limit a novel fuzzy hysteresis band current controller is used. The band height, based on fuzzy control principle...
full texta novel reference current calculation method for shunt active power filters using a recursive algebraic approach
this paper presents a novel method to calculate the reference source current and the referencecompensating current for shunt active power filters (sapfs). this method first calculates theamplitude and phase of the fundamental load current from a recursive algebraic approach blockbefore calculating the displacement power factor. next, the amplitude of the reference mains currentis computed with ...
full textShunt Active Power Filter with Hysteresis Current Control for three Phase Ac-Dc Converter
This paper represents the simulation of Shunt Active Power Filter(SAPF) based on p-q theory and using hysteresis current control to obtain the gating signals for three phase ac-dc converter. The proposed active power filter is employed to reduce the current Total Harmonic Distortion (THD) drawn by the non-linear load and compensate the reactive power. The PI controller is employed to reduce the...
full textMy Resources
Journal title
volume 11 issue 3
pages 276- 283
publication date 2015-09
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023