Analysis and Design of a New Single Switch Non-Isolated Buck-Boost dc-dc Converter
Authors
Abstract:
In this paper, a new transformerless buck-boost converter based on ZETA converter is introduced. The proposed converter has the ZETA converter advantages such as, buck-boost capability and input to output DC insulation. The suggested converter voltage gain is higher than the classic ZETA converter. In the presented converter, only one main switch is utilized. The proposed converter offers low voltage stress of the switch; therefore, the low on-state resistance of the main switch can be selected to decrease losses of the switch. The presented converter topology is simple; hence, the control of the converter is simple. The mathematical analyses of the proposed converter are given. The experimental results confirm the correctness of the analysis.
similar resources
Analysis and Design of a Bidirectional Isolated buck-boost DC-DC Converter with duel coupled inductors
The main objective of this paper, a bidirectional dc–dc converter with duel coupled inductor is proposed. In the boost mode, two capacitors are parallel charged and series discharged by the coupled inductor. Thus, high step-up voltage gain can be achieved with an appropriate duty ratio. The voltage stress on the main switch is reduced by a passive clamp circuit. Therefore, the low resistance RD...
full textIntegrated Buck-Buck-Boost AC/DC Converter
Single-Stage transformerless AC/DC converter received much attention in the universal line application. Unlike the existing converters a new high step-down transformerless single-stage single-switch AC/DC converter is proposed. The topology integrates a buck-buck-boost converter with low intermediate bus and output voltage. The converter utilizes a buck converter as a PFC cell and buck-boost co...
full textA New Topology of Bidirectional Buck-Boost dc/dc Converter with Capability of Soft Switching and input Current Ripple Cancellation
In this paper, a new bidirectional buck-boost dc-dc converter with capability of soft switching and zero input current ripple is proposed. The coupled inductor is used in the proposed converter to eliminate the input current ripple. In the proposed converter, zero voltage switching (ZVS) and zero current switching (ZCS) can be obtained for the main and auxiliary switches, respectively. In addit...
full textSliding Mode Control of a Bidirectional Buck/Boost DC-DC Converter with Constant Switching Frequency
In this paper, sliding mode control (SMC) for a bidirectional buck/boost DC-DC converter (BDC) with constant frequency in continuous conduction mode (CCM) is discussed. Since the converter is a high-order converter, the reduced-order sliding manifold is exploited. Because of right-half-plan zero (RHPZ) in the converter’s duty ratio to output voltage transfer function, sliding mode current...
full textTwo Input Positive Dc-dc Buck-boost Converter Topology
A new multiple-input hybrid energy conversion topology is presented. The proposed topology is capable of combining different energy sources with different voltagecurrent characteristics, while achieving low part number and bi-directional operational. The Multiple-input converters have many applications such as grid connected integrated hybrid generation systems, fuel cells, micro grid-based tel...
full textDesign and Control of a Buck-Boost DC-DC Power Converter
A study on the properties and control of a promising circuit topology for a DC-DC buckboost power converter is presented. The circuit contains four transistors operated synchronously in couples. We propose a set of mathematical models to describe this circuit, and an approach to determine the behavior of the losses occurring inside of it. These are then combined in order to achieve a control sc...
full textMy Resources
Journal title
volume 8 issue 2
pages 116- 127
publication date 2020-08-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023