An occupational risk assessment approach for construction and operation period of wind turbines

Authors

  • A.F. Guneri Department of Industrial Engineering, Yildiz Technical University, 34349, Istanbul, Turkey
  • M. Baskan Department of Industrial Engineering, Yildiz Technical University, 34349, Istanbul, Turkey
  • M. Gul Department of Industrial Engineering, Faculty of Engineering, Munzur University, 62000, Tunceli, Turkey
Abstract:

As wind energy is one of the most important renewable energy sources over the globe, need for increasing safety for this type of energy is gaining importance. Although this sector is not suffering an excessive amount of fatal injury accidents, there are many aspects open for improvements in occupational health and safety management. The construction and operation processes of wind turbines include several hazards that must be reduced. This study aims to present a risk assessment for the construction and operation period of wind tribunes using a new fuzzy based method. Fuzzy analytical hierarchy process, a common used multi criteria decision making method, is applied to assign weights to the parameters of Fine-Kinney risk analysis method. Then, fuzzy VIKOR method is used to prioritize hazards. A case study is carried out for an onshore wind turbine in Turkey by using occupational health and safety experts in weighting risk parameters and evaluating compromised rankings of the hazards. Results reveal the most important hazards both for construction and operation period of the wind tribune. On conclusion of the current study, control measures for those risks and possible corrective-preventive actions for improvement are also provided.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

diagnostic and developmental potentials of dynamic assessment for writing skill

این پایان نامه بدنبال بررسی کاربرد ارزیابی مستمر در یک محیط یادگیری زبان دوم از طریق طرح چهار سوال تحقیق زیر بود: (1) درک توانایی های فراگیران زمانیکه که از طریق برآورد عملکرد مستقل آنها امکان پذیر نباشد اما در طول جلسات ارزیابی مستمر مشخص شوند; (2) امکان تقویت توانایی های فراگیران از طریق ارزیابی مستمر; (3) سودمندی ارزیابی مستمر در هدایت آموزش فردی به سمتی که به منطقه ی تقریبی رشد افراد حساس ا...

15 صفحه اول

Reliability Assessment of Wind Turbines

Wind turbines can be considered as structures that are in between civil engineering structures and machines since they consist of structural components and many electrical and machine components together with a control system. Further, a wind turbine is not a one-of-a-kind structure but manufactured in series production based on many component tests, some prototype tests and zeroseries wind tur...

full text

Modelling the underwater noise associated to the construction and operation of offshore wind turbines

The operation and in particular the construction of offshore wind converters induce considerable underwater noise emissions. It is assumed that small whales and seals can be affected by noise from machines and vessels, piling and installation of the wind turbines. Piling, in particular using hydraulic hammers creates impulsive noise with considerable high energy levels. Currently, only little k...

full text

Power and Velocity Control of Wind Turbines by Adaptive Fuzzy Controller during Full Load Operation

Research on wind turbine technologies have focused primarily on power cost reduction. Generally, this aim has been achieved by increasing power output while maintaining the structural load at a reasonable level. However, disturbances, such as wind speed, affect the performance of wind turbines, and as a result, the use of various types of controller becomes crucial.This paper deals with two ada...

full text

development and implementation of an optimized control strategy for induction machine in an electric vehicle

in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...

15 صفحه اول

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 4  issue 3

pages  281- 298

publication date 2018-07-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023