A Triangular Wilkinson Power Divider with Spaced Output Ports
Authors
Abstract:
This paper proposes an idea to modify the conventional Wilkinson power dividers to have physically spaced output ports. The well-known internal resistor of Wilkinson power divider is now connected to output ports by two additional transmission lines to create a triangular shape power divider. Several modified power dividers are designed at frequency of 1.0 GHz and one of them is fabricated and measured. The measured results of the fabricated diplexer have very good agreement with the theoretical results.
similar resources
A Generalized Coupled-line Dual-band Wilkinson Power Divider with Extended Ports
A generalized two-way coupled-line power divider with extended ports for dual band is proposed in this paper. The power divider is composed of two section coupled-lines, one conventional transmission line, and an isolation resistor, and employs extension of a transmission line or coupled-line at each port. The design equations are obtained based on evenand odd-mode analysis, and analytical idea...
full textWilkinson Power Divider with Ebg Cpw
A 6 : 1 unequal Wilkinson power divider that combines the advantages of a coplanar waveguide with an electromagnetic bandgap (EBG CPW) and microstrip line structures suitable for a PCB circuit design is proposed. The highly characteristic impedance transmission line (TL) is realized by employing the proposed EBG CPW structure, which is difficultly achieved using the conventional microstrip line...
full textSeven Ports Power Divider with Various Power Division Ratios
A seven ports network is proposed to act as a six-way power divider/combiner. The proposed network structure consists of a set of λ/4 planar transmission lines at the design frequency and does not require any isolating resistor. The power divider is capable of providing various power ratios by judicious choice of the transmission lines characteristic impedances. Design equations are derived for...
full textDesign of N-way Power Divider Similar to the Bagley Polygon Divider with an Even Number of Output Ports
Abstract—In this paper, a general design of an equal-split N-way power divider, similar to Bagley polygon power divider, but with an even number of output ports is proposed. A circular-shaped 4way divider is designed and simulated using two different full-wave simulators. Very good matching at the input port is achieved, and good transmission parameters are obtained. After that, the same circul...
full textWide Band Nonuniform Substrate Integrated Waveguide (NSIW) Wilkinson Power Divider
A new wideband Wilkinson Power Divider which use the nonuniform substrate integrated waveguide (NSIW) method is presented in this paper. This structure utilizes NSIWs instead of the uniform quarter wavelength SIWs in conventional Wilkinson power divider. The proposed structure is analyzed by odd and even mode analysis. The proper NSIW section widths can be extracted by using even mode while the...
full textA Novel Design of Dual-band Unequal Wilkinson Power Divider
This paper presents the design of a novel dual-band unequal Wilkinson power divider. The proposed power divider can operate at arbitrary two frequencies without reactive components. The design and analysis of power divider are presented. The structure of the power divider and the formulas used to determine the design parameters have been given. Closed-form design equations are derived based on ...
full textMy Resources
Journal title
volume 7 issue 4
pages 213- 216
publication date 2011-12
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023