A periodic folded piezoelectric beam for efficient vibration energy harvesting
Authors
Abstract:
Periodic piezoelectric beams have been used for broadband vibration energy harvesting in recent years. In this paper, a periodic folded piezoelectric beam (PFPB) is introduced. The PFPB has special features that distinguish it from other periodic piezoelectric beams. The Adomian decomposition method (ADM) is used to calculate the first two band gaps andtwelve natural frequencies of the PFPB. Results show that this periodic beam has wide band gaps at low frequency ranges and the band gaps are close to each other. Results also show that the PFPB can efficiently generate voltage from the localized vibration energy over the band gaps. The natural frequencies of the PFPB are close to each other and most of them are out of the band gaps. Therefore, the PFPB can also generate the maximum voltage over a relatively wide frequency range out of the band gaps. In order to show these features better, the voltage output of the PFPB over a wide frequency range is calculated using the ANSYS software and compared with that of a conventional piezoelectric energy harvester. The ANSYS is also used to validate the analytical results and good agreement is found.
similar resources
Energy Harvesting Electrical from Nano Beam with Layer Piezoelectric under Random Vibration
In the present paper, electrical energy harvesting from random vibrations of an Euler-Bernoulli nano-beam with two piezoelectric layers is investigated. The beam is composed of an aluminum layer together with two piezoelectric ceramic layers (PZT 5A) serving as energy harvesting sensors. In the proposed method, the equations governing the bimorph nano-beam will be analytically derived using cla...
full textArtificial piezoelectric grass for energy harvesting from turbulence-induced vibration
The primary objective of this research is to develop a deploy-and-forget energy harvesting device for use in low-velocity, highly turbulent fluid flow environments i.e. streams or ventilation systems. The work presented here focuses on a novel, lightweight, highly robust, energy harvester design referred to as piezoelectric grass. This biologically inspired design consists of an array of cantil...
full textEnergy harvesting from vibration using a piezoelectric membrane
In this paper we investigate the capability of harvesting the electric energy from mechanical vibrations in a dynamic environment through a unimorph piezoelectric membrane transducer. Due to the impedance matrices connecting the efforts and flows of the membrane, we have established the dynamic electric equivalent circuit of the transducer. In a first study and in order to validate theoretical ...
full textAn efficient Piezoelectric energy-harvesting interface Circuit
Energy harvesting is an emerging technology with applications to handheld, portable, and implantable electronics. Harvesting ambient vibration energy through piezoelectric (PE) means is a popular energy-harvesting technique that can potentially supply 10’s-100’s of μW of available power [1]. One of the limitations of existing PE-harvesters is in their interface circuitry. Commonly used full-bri...
full textPower optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model
Energy harvesting is a conventional method to collect the dissipated energy of a system. In this paper, we investigate the optimal location of a piezoelectric element to harvest maximum power concerning different excitation frequencies of a vibrating cantilever beam. The cantilever beam oscillates by a concentrated sinusoidal tip force, and a piezoelectric patch is integrated on the beam to gen...
full textMy Resources
Journal title
volume 3 issue 2
pages 223- 238
publication date 2017-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023