A High Gain and Forward Body Biastwo-stage Ultra-wideband Low Noise Amplifier with Inductive Feedback in 180 nm CMOS Process
Authors
Abstract:
This paper presents a two-stage low-noise ultra-wideband amplifier to obtain high and smooth gain in 180nm CMOS Technology. The proposed structure has two common source stages with inductive feedback. First stage is designed about 3GHz frequency and second stage is designed about 8GHz. In simulation, symmetric inductors of TSMC 0.18um CMOS technology in ADS software is used.Simulations results show high and relatively smooth S21 equal to 18.674±1.38dB, noise figure of less than 3.7dB, power consumption of 14.6mW with 1.2v supply voltage and suitable matching at the input (S11
similar resources
Ultra-Wideband 45-nm CMOS Low-Noise Amplifier Noise Figure – Gain trade-off for IEEE 802.15
In this paper the recent trends for noise figure are streamlined in concurrence to Ultra Wide Band (UWB) radio transmission spectrum. A comparative study is made between design of single-stage differential low-noise amplifier and inductor-less broadband LNAs in a digital 45 nm CMOS technology. As we move from inductor less impedance to capacitive impedance, the average noise figure decreases in...
full textA New Ultra-Wideband Low Noise Amplifier With Continuous Gain Control
This paper presents a new variable gain low noise amplifier (VG-LNA) for ultra-wideband (UWB) applications. The proposed VG-LNA uses a common-source (CS) with a shunt-shunt active feedback as an input stage to realize input matching and partial noise cancelling. An output stage consists of a gain-boosted CS cascode and a gain control circuit that moves the high resonant frequency to higher freq...
full textHigh - Gain Wideband CMOS Low Noise Amplifier with Two - Stage Cascode and Simplified Chebyshev Filter Sung -
ETRI Journal, Volume 29, Number 5, October 2007 ABSTRACT⎯An ultra-wideband low-noise amplifier is proposed with operation up to 8.2 GHz. The amplifier is fabricated with a 0.18-μm CMOS process and adopts a twostage cascode architecture and a simplified Chebyshev filter for high gain, wide band, input-impedance matching, and low noise. The gain of 19.2 dB and minimum noise figure of 3.3 dB are m...
full textA Transformer Noise-Canceling Ultra-Wideband CMOS Low-Noise Amplifier
Previously reported wideband CMOS low-noise amplifiers (LNAs) have difficulty in achieving both wideband input impedance matching and low noise performance at low power consumption and low supply voltage. We present a transformer noise-canceling wideband CMOS LNA based on a common-gate topology. The transformer, composed of the input and shunt-peaking inductors, partly cancels the noise origina...
full textA 0.18um CMOS Current Reused Low-Noise Amplifier with Gain Compensated for Ultra-Wideband Wireless Receiver
A current reused low-noise amplifier (LNA) with gain compensated to extend the bandwidth and is designed for ultra-wideband (UWB) wireless receiver. The design consists of two cascode common-source amplifier and an output buffer which is implemented in 0.18um RF CMOS process. The LNA gives 13.1dB gain; 9.1GHz 3dB bandwidth (3.1-12.2GHz) while consuming 13.9mW through a 1.8V supply. Over the 3.1...
full textDesign of Two Stage Ultra Low Power CMOS Operational Transconductance Amplifier (OTA) Using 180 nm Technology
This paper deals with well-defined design criteria for ultra low power two stage CMOS operational transconductance amplifiers (OTAs) with simple yet robust implementation in nm dimension. A simple design approach which allows electrical parameters to be univocally related to each circuit element and biasing values for low frequency applications is presented.The operational transconductance ampl...
full textMy Resources
Journal title
volume 31 issue 9
pages 1553- 1558
publication date 2018-09-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023