بررسی و مقایسه پوشش نانوکامپوزیت هیدروکسی‌آپاتیت-آلومینا-زیرکونیا بر روی تیتانیوم در دو روش Dip-coating و Spin-coating

Authors

  • رکسانا فامیلی دانشگاه آزاد اسلامی واحد علوم تحقیقات تهران، دانشکده مهندسی مواد، تهران، ایران
  • شهرام نامجوی نیک مرکز پژوهشی صنعتی معدنی 36884/01/الف رشته صنعتی مهندسی پزشکی، تهران
  • علی نعمتی دانشکده مهندسی و علم مواد، دانشگاه صنعتی شریف، تهران
  • مهران صولتی هشجین دانشکده مهندسی پزشکی، دانشگاه صنعتی امیرکبیر، تهران
Abstract:

در این پژوهش، برای اولین بار از نانوکامپوزیت هیدروکسی­آپاتیت به همراه آلومینا و زیرکونیا به عنوان پوشش بر تیتانیوم استفاده گردید. دو نوع پایه تیتانیوم خالص با درصد ناخالصی آهن متفاوت به عنوان پایه انتخاب شد و پس از آماده‌سازی با سل هیدروکسی­آپاتیت-آلومینا-زیرکونیا پوشش داده شدند. روش پوشش­دهی سل-ژل به دو صورت غوطه­وری (Dip-coating) و چرخشی (Spin-coating) بر روی نمونه­ها اعمال گردید. انتخاب این روش به دلیل ارزان بودن و قابلیت پوشش­دهی انواع نمونه‌ها بوده است. با مقایسه پوشش‌های بدست ‌آمده مشاهده شد که در روش Dip-coating، ترک کمتر و ساختار پوشش یکنواخت‌تر است. البته پوشش حاصل از روش Spin-coating نیز تقریبا یکنواخت است اما ترک‌های بیشتری در آن مشاهده می‌شود. فرآیند پوشش­دهی در سه مرحله انجام شد که در بین سه مرحله کار، در مرحله 2 از نظر همگنی پوشش در تمام قسمت‌ها و تعداد ترک‌ها، پوشش‌های بهتری بدست آمد. به نظر می‌رسد که استفاده از پایه دارای ناخالصی آهن کمتر در هر شرایطی پوشش‌های همگن‌تری را بوجود آورده است. افزایش زمان پیرسازی سل و دمای کلسیناسیون پوشش نیز تأثیر مشخصی بر نتیجه کار داشته و کیفیت پوشش‌های حاصل را افزایش داده است. هدف از انجام این پژوهش بررسی این پوشش­ها برای استفاده به عنوان پوشش بر روی ایمپلنت­های دندانی تیتانیومی بوده است. بعلاوه با توجه به این نکته که ایمپلنت­گذاری خود یک جراحی پرهزینه است، از مواد اولیه ارزان جهت پوشش­دهی استفاده شده است.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

مقایسه تأثیر وضعیت طاق باز و دمر بر وضعیت تنفسی نوزادان نارس مبتلا به سندرم دیسترس تنفسی حاد تحت درمان با پروتکل Insure

کچ ی هد پ ی ش مز ی هن ه و فد : ساسا د مردنس رد نامرد ي سفنت سرتس ي ظنت نادازون داح ي سکا لدابت م ي و نژ د ي سکا ي د هدوب نبرک تسا طسوت هک کبس اـه ي ناـمرد ي فلتخم ي هلمجزا لکتورپ INSURE ماجنا م ي دوش ا اذل . ي هعلاطم ن فدهاب اقم ي هس عضو ي ت اه ي ندب ي عضو رب رمد و زاب قاط ي سفنت ت ي هـب لاتـبم سراـن نادازون ردنس د م ي سفنت سرتس ي لکتورپ اب نامرد تحت داح INSURE ماجنا درگ ...

full text

Interferometric monitoring of dip coating.

Dip-coated films, which are widely used in the coating industry, are usually measured by capacitive methods with micrometric precision. For the first time to our knowledge, we have applied an interferometric determination of the evolution of thickness in real time to nonvolatile Newtonian mineral oils with several viscosities and distinct dip withdrawing speeds. The evolution of film thickness ...

full text

Selective dip-coating of chemically micropatterned surfaces

We characterize the selective deposition of liquid microstructures on chemically heterogeneous surfaces by means of dip coating processes. The maximum deposited film thickness depends critically on the speed of withdrawal as well as the pattern size, geometry, and angular orientation. For vertically oriented hydrophilic strips, we derive a hydrodynamic scaling relation for the deposited film th...

full text

Conformal dip-coating of patterned surfaces

Capillarity-driven self-assembly of small chips onto planar target substrates is a promising alternative to robotic pick-and-place assembly. It critically relies on the selective deposition of thin fluid films on patterned binding sites, which is anyway normally non-conformal. We found that the addition of a thin wetting sidewall, surrounding the entire site perimeter, enables the conformal flu...

full text

Spin Coating of Photoresists

During spincoating, the centrifugal force of the substrate spinning with several 1.000 rounds per minute (rpm) distributes few ml of resist over the substrate. Advantages: The high resist film thickness homogeneity as well as the short coating times make spincoating the most-applied coating technique at least in microelectronics. The fact that the coated resist already lost a significant amount...

full text

Multiple functionalization of single-walled carbon nanotubes by dip coating.

Single walled carbon nanotubes were functionalized with different functionalities by simple dip coating. This fast and reproducible procedure was realized with nanotube coated electrodes for the construction of polyvalent biosensors. Three different pyrene derivatives were attached to the nanotube sidewalls by π-stacking interactions in a one-step reaction.

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 3  issue 8

pages  66- 74

publication date 2011-06-22

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023