preparation and study of bismuth oxide doped and co-doped with cobalt(iii) and holmium(iii) via sol-gel method

Authors

seyyedeh marziyeh hosseini

abdolali alemi

zolfaghar rezvani

abstract

in this research work the solid-solutions of (bi2o3)1-x (co2o3)x, [x= 0.05, 0.1] (1), (bi2o3)1-x (ho2o3) x, [x= 0.025, 0.05] (2), and (bi2o3)1-x-y (co2o3)x (ho2o3)y, [x=0.05] ; [y= 0.01, 0.02] (3) have been synthesized  using sol-gel method. the effects of transition metal oxides doping on the crystallization and phase transition of the bi2o3 were discussed by x-ray diffraction (xrd). the xrd pattern showed that 1 and 3, have body center cubic (bcc) single phase; similar to γ- bi2o3. while 2, has phase transition from bcc to tetragonal phase. the surface morphology of the samples was assessed by scanning electron microscopy (sem). furthermore electrochemical properties of electrodes modifying by these new synthesized ceramics were studied by cyclic voltammetry (cv).

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Preparation and Study of Bismuth Oxide Doped and co-Doped with Cobalt(III) and Holmium(III) via Sol-Gel Method

In this research work the solid-solutions of (Bi2O3)1-x (Co2O3)x, [x= 0.05, 0.1] (1), (Bi2O3)1-x (Ho2O3) x, [x= 0.025, 0.05] (2), and (Bi2O3)1-x-y (Co2O3)x (Ho2O3)y</su...

full text

Structural and optical study of yttrium oxide co-doped with bismuth and zinc prepared by sol-gel method

Bismuth and zinc co-doped Y2O3 samples are synthesized by sol-gel method using ammonium hydroxide as a precipitating agent. Structural analysis is done by XRD, SEMEDAX and the optical properties are analysed by FTIR, UV-Vis absorption studies and photoluminescence (PL) studies. UV-Vis absorption studies show absorption only around 340 nm whereas PL shows peaks around 401 nm, 680 nm and 1020 nm ...

full text

Growth and Optical Properties Investigation of Pure and Al-doped SnO2 Nanostructures by Sol-Gel Method

SnO2 nanoparticles with different percentage of Al (5%, 15%, and25%) were synthesized by sol-gel method. The structure and nature of nanoparticles are determined by of X-ray diffraction analysis. Also, morphology of the samples is evaluated by SEM. Moreover, the optical properties of the samples are investigated with UV-Visible and FT-IR. The XRD patterns are in...

full text

Synthesis and Structural Properties of Bismuth Doped Cobalt Nano Ferrites Prepared by Sol-Gel Combustion Method

A series of Bismuth doped Cobalt nanoferrites of chemical composition CoBixFe2-xO4 (where x = 0.00, 0.05, 0.10, 0.15, 0.20 & 0.25) were prepared by sol-gel combustion method and calcinated at 600 ̊C. The structural and morphological studies were carried out by using X-ray diffraction (XRD), Scanning Electron Microscope (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive Spectroscopy...

full text

Preparation and Characterization of Reduced Graphene Oxide Doped in Sol-Gel Derived Silica for Application in Electrochemical Double-Layer Capacitors

In this study, a new graphene ceramic composite (GCC) was prepared based on the reduced grapheneoxide (rGO) doped in sol-gel derived silica. The GCC was prepared by dispersing rGO nanosheets intothe sol-gel precursors containing methyl triethoxysilane, methanol and hydrochloric acid solution.During an acid catalyzed hydrolyze reaction and gelation proc...

full text

Synthesis and study of co-doped zinc oxide nanoparticles with copper, magnesium, calcium, and cobalt ions by microemulsion method

In the present study, zinc oxide nanoparticles were synthesized by simultaneous doping of Zn0.98Cu0.02O with Ca2+, Mg2+, and Co2+ ions using the microemulsion method. The phase, crystallization, and particle size of samples were identified by X-ray diffraction (XRD) analysis. The formation of the desired phase was confirmed by, X-ray diffraction. Also, the infrared spectrum (Far-FTIR) was confi...

full text

My Resources

Save resource for easier access later


Journal title:
iranian journal of chemistry and chemical engineering (ijcce)

Publisher: iranian institute of research and development in chemical industries (irdci)-acecr

ISSN 1021-9986

volume 34

issue 4 2015

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023