a comparative study on pile group and piled raft foundations (prf) behavior under seismic loading

Authors

m.m. eslami

a. aminikhah

m.m. ahmadi

abstract

study on the seismic behavior of piled rafts and pile groups while the same amount of construction material and excavation is used in their construction, are the main objective of this research. the process where the raft interaction with soil can affect the seismic response and stress distribution is also discussed in the current study. by means, abaqus software was applied for the finite element modeling. firstly, for calibration and verification of the procedure of modeling with two other experimental studies, results were compared by the analysis of models under single frequency sinusoidal dynamic loads. moreover, analyses of the same models were applied under the acceleration time history of the el-centro earthquake. results indicate that the participation of the raft interaction with soil under seismic loading, well improves the seismic response and behavior of a piled foundation systems i.e. internal moments and shear forces as well as deflection. reductions of maximum acceleration response, horizontal displacement and bending moment in the piled raft system, are some important gained results by this study. in addition, the more uniform stress distribution in soil deposit and prevention of stress concentration leads to the reduction of the piled rafts settlement during earthquakes.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

A comparative study on pile group and piled raft foundations (PRF) behavior under seismic loading

Study on the seismic behavior of piled rafts and pile groups while the same amount of construction material and excavation is used in their construction, are the main objective of this research. The process where the raft interaction with soil can affect the seismic response and stress distribution is also discussed in the current study. By means, ABAQUS software was applied for the finite elem...

full text

Raft and Pile Foundations under Cyclic Loading

The paper presents typical phenomena which can occur due to cyclic loading in granular soil. Numerical analysis with different material laws shows the challenges to simulate the ground behaviour realistically. Results of numerical analysis by means of the Finite-Element-Method are presented and the limitation of material laws discussed.

full text

Use of Embedded Pile Elements in 3d Modelling of Piled-raft Foundations

The use of embedded pile elements provides a convenient approach that may save significant modelling time in the simulation of piled foundations. A back-analysis of an Osterberg-cell (O-Cell) load test on a 45 m long pile is presented to illustrate some of the advantages of using structural embedded elements. Comparisons with other modelling approaches for piled-raft foundations have showed goo...

full text

Geotechnical Interaction of Piled Raft Foundations: Two Case Studies

Application of pile-raft foundations, which are known as “compound foundations”, is a suitable alternative in the case of heavy load structures. The interaction behavior of pile raft foundations makes these systems very complex to analyze. Different methods have been proposed to determine the bearing capacity of piled raft systems and distribution of loads between the components, i.e. pile grou...

full text

Determination of Dynamic p-y Curves for Pile Foundations Under Seismic Loading

Beam on a Nonlinear Winkler Foundation (BNWF) approach is widely used in practice since the simulation process is rather simple and requires less computational efforts compared to three-dimensional continuum modeling approaches. In the recent decades, this approach has been extended by proposing advanced onedimensional models in order to better simulate the soil-pile interaction. In this paper,...

full text

study on behavior of soil reinforcing pile in piled raft systems

this research examines the behavior of soil-reinforced piles and applied loads based on the analytical method and by using the numerical results of flac3d software for comparison with the analytical results. the analysis was based on a method called virtual retaining wall, the following into consideration: an imaginary retaining wall that passes the footing edge the bearing capacity of footing ...

full text

My Resources

Save resource for easier access later


Journal title:
computational methods in civil engineering

Publisher: university of guilan

ISSN

volume 2

issue 2 2011

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023