gold catalytic growth of germanium nanowires by chemical vapour deposition method
Authors
abstract
germanium nanowires (genws) were synthesized using chemical vapor deposition (cvd) based on vapor–liquid–solid (vls) mechanism with au nanoparticles as catalyst and germanium tetrachloride (gecl4) as a precursor of germanium. au catalysts were deposited on silicon wafer as a thin film, firstly by sputtering technique and secondly by submerging the silicon substrates in au colloidal solution, which resulted in au nanoparticles with different sizes. genws were synthesized at 400 °c, which is a low temperature for electrical device fabrication. effect of different parameters such as au nanoparticles size, carrier gas (ar) flow and mixture of h2 with the carrier gas on genws diameter and shape was studied by sem images. the chemical composition of the nanostructure was also examined by energy dispersive x-ray spectroscopy (eds).
similar resources
Gold catalytic Growth of Germanium Nanowires by chemical vapour deposition method
Germanium nanowires (GeNWs) were synthesized using chemical vapor deposition (CVD) based on vapor–liquid–solid (VLS) mechanism with Au nanoparticles as catalyst and germanium tetrachloride (GeCl4) as a precursor of germanium. Au catalysts were deposited on silicon wafer as a thin film, firstly by sputtering technique and secondly by submerging the silicon substrates in Au colloidal s...
full textCatalytic hydride vapour phase epitaxy growth of GaN nanowires.
Catalytic growth of GaN nanowires by hydride vapour phase epitaxy is demonstrated. Nickel-gold was used as a catalyst. Nanowire growth was limited to areas patterned with catalyst. Characterization of the nanowires with transmission electron microscopy, x-ray diffraction, and low temperature photoluminescence shows that the nanowires are stoichiometric 2H-GaN single crystals growing in the [000...
full textGold catalyzed growth of silicon nanowires by plasma enhanced chemical vapor deposition
Silicon nanowires were selectively grown at temperatures below 400 °C by plasma enhanced chemical vapor deposition using silane as the Si source and gold as the catalyst. A detailed growth study is presented using electron microscopy, focused ion beam preparation, and Raman spectroscopy. A radio-frequency plasma significantly increased the growth rate. The Si nanowires show an uncontaminated, c...
full textGas-phase dynamics in graphene growth by chemical vapour deposition.
Chemical vapour deposition on a Cu substrate is becoming a very important approach to obtain high quality graphene samples. Previous studies of graphene growth on Cu mainly focus on surface processes. However, recent experiments suggest that gas-phase dynamics also plays an important role in graphene growth. In this article, gas-phase processes are systematically studied using computational flu...
full textInvestigation of single-walled carbon nanotube growth parameters using alcohol catalytic chemical vapour deposition.
A detailed parametric study of single-walled carbon nanotubes (SWNTs) synthesized in powder form and on substrates using the alcohol catalytic chemical vapour deposition (ACCVD) method is reported. As-grown SWNTs were analysed using transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM), Raman spectroscopy and UV-vis-NIR spectroscopy to obtain structural an...
full textFine-tuning of catalytic tin nanoparticles by the reverse micelle method for direct deposition of silicon nanowires by a plasma-enhanced chemical vapour technique.
The reverse micelle method was used for the reduction of a tin (Sn) salt solution to produce metallic Sn nanoparticles ranging from 85 nm to 140 nm in diameter. The reverse micellar system used in this process was hexane-butanol-cetyl trimethylammonium bromide (CTAB). The diameters of the Sn nanoparticles were proportional to the concentration of the aqueous Sn salt solution. Thus, the size of ...
full textMy Resources
Save resource for easier access later
Journal title:
journal of nanostructuresPublisher: university of kashan
ISSN 2251-7871
volume 3
issue 1 2013
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023