electrophoretic deposition of hydroxyapatite

Authors

aliasghar behnamghader

materials and energy research center, tehran, iran, narjes bagheri

materials and energy research center, tehran, iran, babak raissi

materials and energy research center, tehran, iran, ehsan marzbanrad

materials and energy research center, tehran, iran, tahmineh forati

abstract

the purpose of this study was to investigate the deposition of the hydroxyapatite (ha) coating via the electrophoresis procedure. the ha deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. methanol was found to be the best deposition media. among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pressure (10-5-10-4 and 2×10 -2 torr) and also the purge of the argon gas in the tube-like furnace, the optimum environment was the one demonstrating the encapsulation under the vacuum pressure of 2×10-2 torr (washing with argon gas of 99.9% purity). after the examination of 3 sintering temperatures (1020, 1050 and 1100 ºc), the sintering temperature at 1050 ºc illustrated the most desired results. the samples sintered under these conditions were apparently intact, most of the interfacial part of the coating was found to be attached to the substrate surface irregularities and no single cracks were observed.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Electrophoretic Deposition of Hydroxyapatite

     The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...

full text

Electrochemical and electrophoretic deposition of hydroxyapatite for orthopaedic applications

The basic calcium phosphate mineral, hydroxyapatite (HAP) (Ca10(PO4)6(OH)2)), is the prototype of one of the major constituents of bone and teeth. Thin layers of HAP were coated on the surface of type 316L stainless steel by electrophoretic deposition (EPD) from a 2.5% suspension in isopropyl alcohol, and this was followed by vacuum sintering at 800uC for 1 h. The development of HAP coatings wa...

full text

Electrophoretic Deposition of Hydroxyapatite Film Containing Re-Doped MoS2 Nanoparticles

Films combining hydroxyapatite (HA) with minute amounts (ca. 1 weight %) of (rhenium doped) fullerene-like MoS₂ (IF) nanoparticles were deposited onto porous titanium substrate through electrophoretic process (EPD). The films were analyzed by scanning electron microscopy (SEM), X-ray diffraction and Raman spectroscopy. The SEM analysis showed relatively uniform coatings of the HA + IF on the ti...

full text

Nano-Hydroxyapatite Coated Acetabular Cup Implant by Electrophoretic Deposition

A nanostructural hydroxyapatite (HA) coating was deposited to the porous Ti6Al4V acetabular cup implants using a room temperature electrophoretic deposition (EPD) process in order to achieve the improved bonding strength between the implants and cells, fast healing, good corrosion resistance and long-term stability after implantation. The micropores created in the coating will improve the bioac...

full text

Hydroxyapatite coating by electrophoretic deposition at dynamic voltage.

The aim of this study was to evaluate hydroxyapatite (HA) coatings produced by dynamic voltage during electrophoretic deposition (EPD). Dynamic voltages from 0 to 200 V were incrementally applied in three interims. The as-deposited coating was sintered at 800 degrees C and its properties evaluated. Structure and phase analyses of both as-deposited and sintered coatings were evaluated by scannin...

full text

Electrophoretic deposition of biomaterials.

Electrophoretic deposition (EPD) is attracting increasing attention as an effective technique for the processing of biomaterials, specifically bioactive coatings and biomedical nanostructures. The well-known advantages of EPD for the production of a wide range of microstructures and nanostructures as well as unique and complex material combinations are being exploited, starting from well-disper...

full text

My Resources

Save resource for easier access later


Journal title:
iranian journal of pharmaceutical sciences

جلد ۴، شماره ۱، صفحات ۶۳-۶۸

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023