monte carlo simulation of a linear accelerator and electron beam parameters used in radiotherapy

Authors

mohammad taghi bahreyni toossi professor, medical physics research center, bu-ali research institute, mashhad university of medical sciences, mashhad, iran

mehdi momen nezhad ph.d., linear accelerator dept., imam reza hospital, mashhad university of medical sciences, mashhad, iran

seyed mohammad hashemi m.sc., medical physics research center, mashhad university of medical sciences, mashhad, iran

abstract

introduction: in recent decades, several monte carlo codes have been introduced for research and medical applications. these methods provide both accurate and detailed calculation of particle transport from linear accelerators. the main drawback of monte carlo techniques is the extremely long computing time that is required in order to obtain a dose distribution with good statistical accuracy. material and methods: in this study, the mcnp-4c monte carlo code was used to simulate the electron beams generated by a neptun 10 pc linear accelerator. the depth dose curves and related parameters to depth dose and beam profiles were calculated for 6, 8 and 10 mev electron beams with different field sizes and these data were compared with the corresponding measured values. the actual dosimetry was performed by employing a welhofer-scanditronix dose scanning system, semiconductor detectors and ionization chambers. results: the result showed good agreement (better than 2%) between calculated and measured depth doses and lateral dose profiles for all energies in different field sizes. also good agreements were achieved between calculated and measured related electron beam parameters such as e0, rq, rp and r50. conclusion: the simulated model of the linac developed in this study is capable of computing electron beam data in a water phantom for different field sizes and the resulting data can be used to predict the dose distributions in other complex geometries.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Monte Carlo Simulation of a Linear Accelerator and Electron Beam Parameters Used in Radiotherapy

Introduction: In recent decades, several Monte Carlo codes have been introduced for research and medical applications. These methods provide both accurate and detailed calculation of particle transport from linear accelerators. The main drawback of Monte Carlo techniques is the extremely long computing time that is required in order to obtain a dose distribution with good statistical accuracy. ...

full text

A Monte Carlo Simulation of Photon Beam Generated by a Linear Accelerator

ntroduction:  Monte  Carlo  simulation  is  the  most  accurate  method  of  simulating  radiation  transport  and  predicting doses at different points of interest in radiotherapy. A great advantage of the Monte Carlo method  compared  to  the  deterministic  methods  is  the  ability  to  deal  accurately  with  any  complex  geometry.  Its  disadvantage is the extremely long computing time r...

full text

Localization of electron virtual SSD in a Siemens-Primus linear accelerator: Comparison of measurements with Monte Carlo simulation

Introduction: Because of importance of impact of the Source to Surface Distance (SSD) in determining of monitor unit for electron-therapy, it is essential to know the Virtual Source Position (VSP) for electron beam for a linear therapeutic accelerator for each energy and field size. , especially using the Khan method (photo distance squared method) And compare the results with...

full text

Benchmarking of Monte Carlo model of 6 Mv photon beam produced by Siemens Oncor® linear accelerator: determination of initial electron beam parameters in comparison with measurement

Introduction: The aim of this study was to investigate the initial electron beam parameters for Monte Carlo model of 6MV photon beam produced by Siemens Oncor® linear accelerator.   Materials and Methods: In this study, the EGSnrc Monte Carlo user codes BEAMnrc and DOSXYZnrc were used. The beamnrc code were used for modelling of a 6 MV photon beam produced by...

full text

a monte carlo simulation of photon beam generated by a linear accelerator

ntroduction:  monte  carlo  simulation  is  the  most  accurate  method  of  simulating  radiation  transport  and  predicting doses at different points of interest in radiotherapy. a great advantage of the monte carlo method  compared  to  the  deterministic  methods  is  the  ability  to  deal  accurately  with  any  complex  geometry.  its  disadvantage is the extremely long computing time r...

full text

Monte Carlo Investigation of Photon Beam Characteristics and its Variation with Incident Electron Beam Parameters for Indigenous Medical Linear Accelerator

Purpose A Monte Carlo model of a 6 MV medical linear accelerator (linac) unit built indigenously was developed using the BEAMnrc user code of the EGSnrc code system. The model was benchmarked against the measurements. Monte Carlo simulations were carried out for different incident electron beam parameters in the study. Materials and Methods Simulation of indigenously developed linac unit has ...

full text

My Resources

Save resource for easier access later


Journal title:
iranian journal of medical physics

جلد ۶، شماره ۲، صفحات ۱۱-۱۸

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023