fabrication and characterization of spongy denuded amniotic membrane based scaffold for tissue engineering

Authors
abstract

objective: as a biological tissue material, amniotic membrane (am) has low immunogenicity and to date has been widely adopted in clinical practice. however, some features such as low biomechanical consistency and rapid biodegradation is limited the application of am. therefore, in this study, we fabricated a novel three-dimensional (3d) spongy scaffold made of the extracellular matrix (ecm) of denuded am. due to their unique characteristics which are similar to the skin, these scaffolds can be considered as an alternative option in skin tissue engineering. materials and methods: in this experimental study, cellular components of human amniotic membrane (ham) were removed with 0.03% (w/v) sodium dodecyl sulphate (sds). quantitative analysis was performed to determine levels of glycosaminoglycans (gags), collagen, and deoxyribonucleic acid (dna). to increase the low efficiency and purity of the ecm component, especially collagen and gag, we applied an acid solubilization procedure hydrochloridric acid (hcl 0.1 m) with pepsin (1 mg/ml). in the present experiment 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide hydrochloride (edc)/n-hydroxysuccinimide (nhs) cross linker agent was used to improve the mechanical properties of 3d lyophilized am scaffold. the spongy 3d am scaffolds were specified, by scanning electron microscopy, hematoxylin and eosin (h&e;) staining, a swelling test, and mechanical strength and in vitro biodegradation tests. human fetal fibroblast culture systems were used to establish that the scafolds were cytocompatible. results: histological analysis of treated human am showed impressive removal of cellular components. dna content was diminished after treatment (39 ± 4.06 μg/ml vs. 341 ± 29.60 μg/ml). differences were observed between cellular and denude am in matrix collagen (478 ± 18.06 μg/mg vs. 361 ± 27.47 μg/mg).with the optimum concentration of 1 mm nhs/edc ratio1:4, chemical cross-linker agent could significantly increase the mechanical property, and resistance to collagenase digestion. the results of 2, 4, 6-trinitrobenzenesulfonic acid (tnbs) test showed that cross-linking efficiency of am derived ecm scaffolds was about 65% ± 10.53. scaffolds treated with nhs/edc cross-linker agent by 100 μg/ml collagenase, lost 75% of their dry weight after 14 days. the average pore size of 3d spongy scaffold was 160 μm measured from scanning electron microscope (sem) images that it is suitable for cell penetration, nutrients and gas change. in addition, the nhs/ edc cross-linked am scaffolds were able to support human fetal fibroblast cell proliferation in vitro. extracts and contact prepared from the 3d spongy scaffold of am showed a significant increase in the attachment and proliferation of the human fetal fibroblasts cells. conclusion: the extra-cellular matrix of denuded am-based scaffold displays the main properties required for substitute skin including natural in vitro biodegradation, similar physical and mechanical characterization, nontoxic biomaterial and no toxic effect on cell attachment and cell proliferation.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Fabrication and Characterization of Spongy Denuded Amniotic Membrane Based Scaffold for Tissue Engineering

OBJECTIVE As a biological tissue material, amniotic membrane (AM) has low immunogenicity and to date has been widely adopted in clinical practice. However, some features such as low biomechanical consistency and rapid biodegradation is limited the application of AM. Therefore, in this study, we fabricated a novel three-dimensional (3D) spongy scaffold made of the extracellular matrix (ECM) of d...

full text

Fabrication and characterization of nanofibrous tricuspid valve scaffold based on polyurethane for heart valve tissue engineering

Objective(s): Tissue engineering represents a new approach to solve the current complications of the heart valve replacements by offering viable valve prosthesis with growth and remodeling capability. In this project, electrospinning and dip coating techniques were used to fabricate heart valve constructs from medical grade polyurethane (PU). Methods: Fir...

full text

Fabrication and Characterization of Polycaprolactone – Zeolite Y Nanocomposite for Bone Tissue Engineering

In recent years, nanoceramics have been used in scaffolds to emulate the nanocomposite with a three-dimensional structure of natural bone tissue. In this regard, polycaprolactone biopolymer is widely used as a scaffold in bone tissue engineering. The goal of this research is to produce porous scaffolds of polycaprolactone - zeolite biocomposite with suitable mechanical, bioactive and biological...

full text

fabricating electrospun poly(3-hydroxybutyrate)/hydroxyapatite nanocomposite scaffold for tissue engineering application

. در رســاله ی حاضر، ابتدا داربست نانوالیاف سه بعدی متخلخل به روش الگوبرداری تصویری شبیه سازی شد. با استفاده از طراحی آزمایش به روش تاگوچی پس از ساخت داربست های پلی (3- هیدروکسی بوتیرات) (p3hb) شناسایی رفتار پارامترهای موادی مثل لزجت سیال پلیمر، فراریت و رسانایی الکتریکی محلول پلیمری و پارامترهای دستگاهی مثل دبی حجمی سیال، ولتاژ الکتریکی و فاصله نازل تا جمع کننده صورت گرفت. بعد از محاسبه ی خصوص...

Fabrication and Characterization of PES Based Nanofiltration Membrane Modified by Zeolite Nanoparticles for Water Desalination

In the present study, mixed matrix PES/zeolite nanoparticles nanofiltration membranes were prepared via the solution casting technique. The effect of zeolite concentration on the PES membrane performance and its properties was studied. Cross-sectional scanning electron microscope (SEM) observations showed that the porosity in the membrane sub-layer was increased with addition of zeolite into th...

full text

Fabrication and characterization of the Ti-6Al-4V/Mg scaffold

Ti–6Al–4V scaffolds were fabricated by powder metallurgical space holder technique in this research. The most added magnesium (Mg) powder was evaporated and a skeleton of Ti-6Al-4V alloy was produced. For this purpose Ti-6Al-4V and Mg powders mixture compacted in a steel die by applying uniaxial pressure of 500 MPa before sintering the green product in a sealed quartz tubes at 900 °C for 2 hour...

full text

My Resources

Save resource for easier access later


Journal title:
cell journal

جلد ۱۶، شماره ۴، صفحات ۴۷۶-۴۸۷

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023