adsorption behavior of cadmium on modified mesoporous aluminosilicates
Authors
abstract
in this study, mesoporous mcm-41 has been modified by incorporation of aluminum ion asa rapid, simple and inexpensive method for modification. the adsorbent is characterized usingpowder x-ray diffraction and nitrogen adsorption-desorption isotherm data. the distributioncoefficient of cadmium ion on the mesoporous aluminosilicates has been enhanced with theincrease of the aluminum in the framework of the adsorbent. adsorption behavior of cadmiumon the al10mcm-41 and al20mcm-41 adsorbents has been studied and experimentaladsorption isotherm is successfully described by langmuir model. the maximum adsorptioncadmium capacity was 11.5 mg g-1. the effects of ph and adsorption kinetics have also beenstudied by batch method and the result shows ph of solution hasn't any effect on cadmiumadsorption.
similar resources
Adsorption behavior of cadmium on modified mesoporous aluminosilicates
In this study, mesoporous MCM-41 has been modified by incorporation of aluminum ion asa rapid, simple and inexpensive method for modification. The adsorbent is characterized usingpowder X-ray diffraction and nitrogen adsorption-desorption isotherm data. The distributioncoefficient of cadmium ion on the mesoporous aluminosilicates has been enhanced with theincrease of the aluminum in the framewo...
full textAdsorption behavior studies of Cerium on modified Mesoporous Aluminosilicate
In this paper, the adsorption of cerium on modified Mesoporous aluminosilicate (with Si/Al mole ratio of 10) was studied. The effects of pH, contact time, initial concentration of cerium on adsorption of cerium were investigated. The adsorption capacity was high in the pH range of 4-8 and decreases with decreasing of the pH value. The Langmuir and Freundlich isotherms were applied to represent ...
full textAdsorption behavior studies of Cerium on modified Mesoporous Aluminosilicate
In this paper, the adsorption of cerium on modified Mesoporous aluminosilicate (with Si/Al mole ratio of 10) was studied. The effects of pH, contact time, initial concentration of cerium on adsorption of cerium were investigated. The adsorption capacity was high in the pH range of 4-8 and decreases with decreasing of the pH value. The Langmuir and Freundlich isotherms were applied to represent ...
full textadsorption behavior studies of cerium on modified mesoporous aluminosilicate
in this paper, the adsorption of cerium on modified mesoporous aluminosilicate (with si/al mole ratio of 10) was studied. the effects of ph, contact time, initial concentration of cerium on adsorption of cerium were investigated. the adsorption capacity was high in the ph range of 4-8 and decreases with decreasing of the ph value. the langmuir and freundlich isotherms were applied to represent ...
full textAdsorption Behavior of Cadmium(II) and Lead(II) on Mesoporous Silicate MCM-41
This investigation examines metal ion adsorption on mesoporous silicate, MCM-41, synthesized from sodium silicate solution and cethyltrimethylammonium bromide (CTAB). MCM-41 has potential as an adsorbent material, with a regular hexagonal pore structure, large specific surface area, and large pore volume. The MCM-41 synthesized for this investigation is characterized using powder X-ray Received...
full textAdsorption of Acid Dyes on Modified Mesoporous SBA-15: Comparison of Two Dyes
In this study, SBA-15-PAMAM mesoporous Nano-adsorbent was synthesized, characterized and applied for adsorption of Acid dyes (Acid Blue 62 (AB62) and Acid Red 266 (AR266)) from aqueous Medias. Adsorption of AB62 and AR266 on SBA-15 ordered mesoporous silica, polyamidoamine functionalized SBA-15(SBA-15-PAMAM), has been investigated. In order to assess the synthesized adsorbent constructional, FT...
full textMy Resources
Save resource for easier access later
Journal title:
journal of the iranian chemical researchجلد ۴، شماره ۴، صفحات ۲۱۹-۲۲۶
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023