mechanical properties of a light weight wood base sandwich panel made from sunflower stalks and poplar layer scrap

Authors

محمد شمسیان

عضو هیات علمی طه سخندان

دانشجو حمیدرضا منصوری

مدیر گروه صنایع چوب و کاغذ دانشگاه زابل علی بیات کشکولی

هیات علمی گروه صنایع چوب و کاغذ دانشگاه زابل

abstract

light weight wood base sandwich panels have some special properties and their most important properties is high mechanical strength with its light weight. these panels can replace instead of traditional structural systems in iran. the purpose of this paper is investigating the mechanical properties of light weight wood base sandwich panels that have made from sunflower stalk wastes and particles of poplar layers. so, melamine urea formaldehyde resin with ratio of (20:80, 35:65, 50:50), particles of sunflower stalk and poplar layers wastes with composition ratio of (0:100, 25:75, 50:50, 75:25, 100:0) and poplar layer with 1.8 millimeter was made for surfaces of panel and manufactured in one step press. mechanical test such as modulus of rupture, modulus of elasticity, internal bonding, compression parallel to board plane were made according to astm standards. results of tests were analyzed through the analysis of variance and classification of averages according with duncan method tests with reliability of 95 percent was made. as a result, the mechanical strengths improve with increasing of melamine-urea formaldehyde ratio. panels with pure sunflower and poplar obtain respectively the highest bending strength 19 and 25 mpa, modulus of elasticity 6003 and 8004 mpa and internal bond 0.31 and 0.43 mpa. in conjunction with the parallel pressure resistance, sandwich panels with a core of pure sunflower stalks with 6.9 mpa was the most resistant. also strengths have reduced with increasing the sunflower stalks ratio to particles of poplar layers in core layers.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

Rheological and Mechanical Properties of Light Weight Self-Compacting Concrete Containing Sirjan Iron Mine Waste

Recycling is a logical option for materials that are not suitable for composting. One of these materials is iron mines waste that, according to their compounds, can be used as a substitute part of cement in concrete. For this aim, rheological and mechanical properties and durability of light weight self-compacting concrete (LWSCC) containing Sirjan iron mine waste (SIMW) as partial substitute o...

full text

extraction and acetylation of purified trypsin from bovin pancreas and study of some its physico-chemical properties

آنزیم تریپسین در شرایط قلیایی ناپایدار می باشد .و فعالیت پروتئولیتیکی تریپسین منجربه خود هضمی آن در جایگاههای خاصی می گردد. بنابر این آنزیمی با ناپایداری بالا محسوب میگردد. در سالهای اخیر موفق شدند که با ایجاد تغیرات شیمیایی با اضافه کردن فلزات خاص ، کلسیم و یا عمل استیلاسیون منجر به افزایش پایداری آنزیم تریپسین گردند. مطالعات در حال حاضر نشان می دهد که تریپسین استیله شده فعالیت آنزیمی خود را ...

15 صفحه اول

Designing a prefabricated sandwich composite roofing system Made up of resisting facings and light-weight concrete core with truss-shaped connectors

In this paper, a new roofing system is introduced, which is constructued using the precast composite sandwich panels. This roofing sandwich panels system consists of three kinds of precast concrete sandwich panels including capital panels, beam or between columns panels, and slab or middle panels. The panels are composed of three layers; A high strength reinforced concrete top layer. A thick la...

full text

Influence of thermo-pressing conditions on the mechanical properties of biodegradable fiberboards made from a deoiled sunflower cake

The objective of this study was to manufacture new biodegradable fiberboards by thermo-pressing. The starting material was deoiled cake (only 0.9% oil content), generated during the biorefinery of sunflower (Helianthus annuus L.) whole plant in a co-rotating twin-screw extruder. All fiberboards were cohesive mixtures of proteins and lignocellulosic fibers, acting respectively as binder and rein...

full text

Utilization of a Chemical-mechanical Pulp with Improved Properties from Poplar Wood in the Composition of Packing Papers

The aim of the present work is to obtain a chemical-mechanical pulp (CMP) from poplar wood with improved properties, to be used in packing papers in place of more expensive softwood or hardwood pulp. For improving the CMP quality indicators, a preliminary treatment of the pulp has been carried out with a mixture of oxidizing enzymes produced from Phanerochaete chrysosporium, including lignin pe...

full text

My Resources

Save resource for easier access later


Journal title:
جنگل و فرآورده های چوب

جلد ۶۹، شماره ۱، صفحات ۱۹۹-۲۱۴

Keywords
light weight wood base sandwich panels have some special properties and their most important properties is high mechanical strength with its light weight. these panels can replace instead of traditional structural systems in iran. the purpose of this paper is investigating the mechanical properties of light weight wood base sandwich panels that have made from sunflower stalk wastes and particles of poplar layers. so melamine urea formaldehyde resin with ratio of (20:80 35:65 50:50) particles of sunflower stalk and poplar layers wastes with composition ratio of (0:100 25:75 50:50 75:25 100:0) and poplar layer with 1.8 millimeter was made for surfaces of panel and manufactured in one step press. mechanical test such as modulus of rupture modulus of elasticity internal bonding compression parallel to board plane were made according to astm standards. results of tests were analyzed through the analysis of variance and classification of averages according with duncan method tests with reliability of 95 percent was made. as a result the mechanical strengths improve with increasing of melamine urea formaldehyde ratio. panels with pure sunflower and poplar obtain respectively the highest bending strength 19 and 25 mpa modulus of elasticity 6003 and 8004 mpa and internal bond 0.31 and 0.43 mpa. in conjunction with the parallel pressure resistance sandwich panels with a core of pure sunflower stalks with 6.9 mpa was the most resistant. also strengths have reduced with increasing the sunflower stalks ratio to particles of poplar layers in core layers.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023