evaluating the seismic performance of steel-sma hybrid braces
Authors
abstract
the seismic performance of hybrid braces composed of steel and shape memory alloy (sma) was investigated in this paper. six types of hybrid braces were used, constituted by sma content of 0, 20, 40, 60, 80, and 100%. a nonlinear dynamic analysis was performed under el centro earthquake records, with the maximum acceleration of 0.6g and 0.9g. our results showed that the seismic performance, i.e., the amount of energy absorption and residual strain, of steel–sma hybrid braces depends on the sma content. the optimal value of sma content was 20%, as, at this concentration, a hybrid brace can be designed with good seismic performance at a justifiable fabrication cost.
similar resources
Evaluating the Seismic Performance of Steel-SMA Hybrid Braces
The seismic performance of hybrid braces composed of steel and shape memory alloy (SMA) was investigated in this paper. Six types of hybrid braces were used, constituted by SMA content of 0, 20, 40, 60, 80, and 100%. A nonlinear dynamic analysis was performed under El Centro earthquake records, with the maximum acceleration of 0.6g and 0.9g. Our results showed that the seismic performance, i.e....
full textExperimental Investigation on Seismic Behavior of Steel Truss-RC Column Hybrid Structure with Steel Diagonal Braces
This paper aims to provide an experimental support on seismic performance evaluation of the steel braced truss-RC (reinforced concrete) column hybrid structure, which could be applied as the air-cooled supporting structural system in large-capacity thermal power plants located in strong earthquake prone regions. A series of pseudo-dynamic tests (PDTs) and quasi-static tests (QSTs) were performe...
full textEvaluating the Performance of the Buckling Restrained Braces in Tall Buildings with peripherally braced frames
In recent years, seismic design of structures has been undergoing significant changes due to increasing demand for optimization and minimizing the level of damage and reducing the cost of structural repairs. Development of analytical methods and remarkable improvements of computer performance have been among the factors which influenced the design of structures. A lot of research has been condu...
full textDesign of SMA-Brace Devices for the Seismic Retrofit of Steel CBF
Received: November 02, 2017 Revised: January 12, 2018 Accepted: January 17, 2018 Abstract: Introduction: Retrofit interventions are often performed by introducing in structures dissipative devices able to improve the global seismic response particularly in terms of energy dissipation capacity. In the case of Concentric Braced Steel Frames (CBF), these devices are generally introduced in the for...
full textAN EFFECTIVE HYBRID METHOD FOR OPTIMIZING STEEL FRAMES WITH IMPROVED SEISMIC PERFORMANCE
The main purpose of this paper was to use a combination of Energy-based design method and whale algorithm (WOA), hereinafter referred to as E-WOA, to optimize steel moment frames and improve the seismic performance. In E-WOA, by properly estimating the seismic input energy and determining the optimal mechanism for the structure, steel frames are designed based on the energy balance method; acco...
full textSeismic behavior of cable braces strengthened with a central steel plate
This research suggests a novel method to use steel cables as a structural bracing system. The Moment Resisting Frame (MRF) works in tandem with the cable bracings when this method is used. The suggested bracing model can address the fundamental problem of current cable bracing methods, namely the lack of flexibility while keeping costs to a minimum. This approach requires no additional equipmen...
full textMy Resources
Save resource for easier access later
Journal title:
civil engineering infrastructures journalجلد ۴۸، شماره ۲، صفحات ۲۸۵-۲۹۶
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023