Support Crystal Plane Effects in the Steam Reforming of Alcohols on Pd/ZnO and Co/ZnO
نویسندگان
چکیده
Introduction The steam reforming of alcohols, particularly methanol and ethanol, presents a promising method of producing hydrogen. Due to its high activity at relatively low temperatures, Pd/ZnO has received attention as a methanol steam reforming (MSR) catalyst to produce H2 at very high CO2 selectivity. 1 Pd supported on most other materials dehydrogenates methanol to CO. Similarly, Co catalyzed ethanol steam reforming (ESR) exhibits very good activity and selectivity toward H2 when supported by ZnO, although the distinction between ZnO and other supports is not as pronounced as with the Pd/ZnO catalyzed MSR. The activation of the MSR pathway on Pd/ZnO has been attributed to the formation of PdZn alloys when reduced at high temperatures. While the incorporation of Zn into the Pd surface clearly alters the reaction energetics, it is not known if ZnO contributes a secondary effect. To assist in understanding the role of ZnO in the steam reforming of alcohols, we investigated the decomposition of methanol and ethanol on Pd and Co supported by ZnO single crystals. As part of a larger study to understand the role of ZnO, we focused on examining differences in catalyst reactivity of Pd and Co toward alcohol decomposition when supported
منابع مشابه
Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst
Ternary Cu/ZnO/metal oxide catalysts are prepared through the co-precipitation method under strict control of parameters like pH, calcination conditions, and precipitation temperature in a systematic manner. The metal oxides applied in this study consist of Al2O3, ZrO2, La2O3 and Ce2O3. The distinction of this work in comparison with similar research is a comprehensive investigatation of the ca...
متن کاملHydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study
Hydrogen was produced by steam reforming of dimethyl ether (DME) using a physical mixture of commercial HZSM-5 zeolite (for DME hydrolyzing) and Cu/ZnO/Al2O3 (for methanol steam reforming) as a catalyst in a fixed bed reactor. The experiments were performed at atmospheric pressure and in a temperature range from 270 to 310 °C. The effects of feed temperature and gas hourly space velocity (GHSV)...
متن کاملPdZn/Pd(111) surface alloys as model catalysts for methanol steam reforming
Pd supported on ZnO has recently raised great interest as a catalyst for methanol steam reforming. Different from unsupported Pd, Pd-ZnO shows high selectivity and good conversion towards CO2 and hydrogen [1]. The difference is attributed to the formation of a PdZn alloy under reaction conditions, but there is still limited knowledge on the exact surface structure/composition and reaction mecha...
متن کاملImproved H2 Production by Ethanol Steam Reforming over Sc2O3-Doped Co-ZnO Catalysts
H2 production by catalytically ethanol steam reforming (ESR) is an effective and prospective method for the application of fuel cells. However, the catalysts’ desirable activity and stability remains an unprecedented challenge. Herein, a type of Sc2O3-doped Co-ZnO catalyst was developed by a co-precipitation method. The so-constructed Co2Zn1Sc0.3 catalyst exhibited a superb catalytic performanc...
متن کاملIn situ Studies of Alloy Formation on a Pd/Ga2O3 Methanol Steam Reforming Catalyst
Methanol steam reforming is a promising reaction in terms of hydrogen production for use in PEM fuel cells. Catalyst research has focused mainly on Cu/ZnO formulations, because of their superior selectivity to CO2 and H2. The common byproduct CO is problematic due to its poisoning effect on the anode of a downstream fuel cell. Some years ago it was shown that palladium supported on certain redu...
متن کامل