LH0024 and LH0032 High Speed Op Amp Applications
ثبت نشده
چکیده
The LH0024 and LH0032 are very high speed general purpose operational amplifiers exhibiting 70 MHz bandwidths, 500 V/ms slew rates and 100 to 300 ns settling time to 0.1%. The LH0032 has the added advantage of FET input characteristics. Both, however, can drive loads with peak currents of 100 milliamperes (mA). The op amps are stable without external compensation when operating at closedloop gains of more than 100. Both are constructed with thick film hybrid technology and are actively trimmed for consistent device performance. Table I summarizes the typical performance data for these op amps. Additional information may be obtained from the respective data sheets.
منابع مشابه
High bandwidth low power operational amplifier design and compensation techniques
The need for high bandwidth operational amplifiers (op amp) exists for numerous applications. This need requires research in the area of op amp bandwidth extension. The exploited method in this thesis uses a class of compensation called Indirect Feedback Frequency Compensation in which the compensation current is fed back indirectly from the output to an internal high impedance node, to extend ...
متن کاملDesign High Speed, Low Noise, Low Power Two Stage Cmos Operational Amplifier
The objective of this paper is to design a Low-Voltage, Low-Power and High-Gain Operational Amplifier used for high speed compensated CMOS op-amp which specifies open loop circuit parameters to obtain enhanced gain, settling time and closed loop stability An Op-Amp is designed in a 0.18 μm standard digital CMOS Technology The low noise high speed Op-Amp is designed using 180nm CMOS technology a...
متن کاملFully Differential Operational Amplifier and its Application in a Digitally Programmable VGA
The design of high-accuracy analogue circuits is becoming a difficult task with the scaling down of supply voltages and transistor channel lengths of the current mixed-signal integrated circuits. Most of this kind of circuits require the use of the highestperformance active cell: the operational amplifier (op amp). Designers are continuously working toward tradeoff solutions between gain, input...
متن کاملDesigning CMOS folded-cascade operational amplifier And Implementation with CMOS Technology in IC
In this paper a new high gain bandwidth (GBW) and low power folded cascade OPAMP is presented. It has been implemented and layouted by CADENCE software in 0.18μm. Its DC gain is 82db and its bandwidth is 200MHz. Power consumption is one of the main design challenges in very-lowvoltage high-speed analog integrated circuits. In this paper, different techniques to reduce the power consumption in l...
متن کاملTwo Stage Op - Amp Using Cmos – Areview
Operational Amplifier (op-amp) is a basic building block of many analog and mixed signal systems. Many different types of op-amp are used to achieve various functions, such as DC biasing, high speed amplifying, reduced voltage supply, high gain. To achieve these parameter successfully there are several techniques.The op-amp contains two stages to increase gain and improve slew rate, voltage swi...
متن کامل