A model for predicting endotoxin concentrations in metalworking fluid sumps in small machine shops.

نویسندگان

  • D Park
  • K Teschke
  • K Bartlett
چکیده

METHODS In British Columbia, Canada, nineteen small machine shops which used water-based metalworking fluids (MWF) were examined. One bulk MWF sample was taken from each independent sump (N=140) and tested for endotoxin using the Limulus Amoebocyte Lysate assay. Factors that might influence the MWF sump endotoxin concentration were investigated using mixed effect multiple regression modelling to control for repeated measures within shops. RESULTS The geometric mean (GM) endotoxin concentration was 6791 EU/ml. Contamination of MWF with tramp oil, MWF pH, MWF temperature, and MWF type were significant predictors of sump fluid endotoxin concentration (model P=0.0001, ordinary least squares R(2) =0.36). Concentrations of endotoxin in sump fluids were increased by MWF contamination with tramp oils such as hydraulic oils, preservative oils, spindle oils, slidway lubricants, gear lubricants, and greases (model predicted GM=17400 EU/ml vs. 1600 EU/ml without tramp oil). Concentrations were also elevated where pH was lower than 8.5 (predicted GM=10600, vs 3600 EU/ml for pH 8.5 to 9.5), where soluble fluids were used (predicted GM=11800 vs. 2800 EU/ml for synthetic fluids), and where sump fluid temperatures were higher (predicted GM=2600 EU/ml at 11 degrees C vs. 21500 EU/ml at 32 degrees C). The within-shop correlation of sump bulk fluid endotoxin concentrations was 38%. CONCLUSIONS Minimizing tramp oil contamination, using synthetic fluids, and monitoring pH and temperature would be valuable tools for controlling endotoxin contamination in MWF sumps. In addition, since there was correlation within-shop, contamination of one sump in a shop may suggest changing the fluids in all.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Occupational Exposure to Formaldehyde from Metalworking Fluids Containing the Antimicrobial Agent Methylenebismorpholine

The objective of this study was to measure formaldehyde present in the atmosphere of a machine shop using a water-based emulsion metalworking fluid containing the formaldehyde-generating antimicrobial agent methylenebismorpholine. Measured formaldehyde values were compared to estimated atmospheric values calculated from vapor-liquid equilibrium (evaporative) and aerosol (mist) generation. Good ...

متن کامل

Metalworking fluids: oil mist and beyond.

This article is based upon my own experiences with metalworking fluids and the adverse health effects and medical conditions associated with exposure to metalworking fluids. I have researched and witnessed the benefits that can be achieved when metalworking fluids are properly maintained and managed. My experiences have provided insight into how a shop operates, including comprehension of the e...

متن کامل

Exposure to metalworking fluid aerosols and determinants of exposure.

Metalworking fluid (MWF) aerosols are associated with respiratory disorders including asthma and hypersensitivity pneumonitis. The aims of this study were to describe exposure to inhalable MWF aerosols and volatile compounds in machine shops, to estimate the influence of important determinants of exposure and to compare different sampling techniques for MWF aerosols. Personal full-shift air sam...

متن کامل

Respiratory exposure to components of water-miscible metalworking fluids.

Water-miscible metalworking fluids (MWFs) are capable of causing respiratory symptoms and diseases. Recently, much emphasis has been put on developing new methods for assessing respiratory exposure to MWF emulsions. The air concentrations of ingredients and contaminants of MWF and inhalable dust were measured in 10 metal workshops in southern Finland. Oil mist was determined by infra red spectr...

متن کامل

Metalworking fluid with mycobacteria and endotoxin induces hypersensitivity pneumonitis in mice.

BACKGROUND Human cases of hypersensitivity pneumonitis (HP) have been reported among machinists for over 10 yr. Although mycobacteria have been implicated as causal agents, this has not been established in experimental studies and the mechanisms remain unclear. Other constituents of in-use metalworking fluids (MWFs) may also contribute to the development of lung disease. We investigated the pot...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Annals of occupational hygiene

دوره 45 7  شماره 

صفحات  -

تاریخ انتشار 2001