Multi Band, Multi Mode Digital Rf Receiver Front-end Module for M-wimax
نویسندگان
چکیده
A digital RF receiver front-end employing a DT filter is proposed for application to m-WiMAX & The SAW-less receiver architecture, where the large out-of-band interferer can be rejected selectively by using a scalable frequency response property of FIR filter. In addition to the flexibility of the DT filter, the new non-decimation finite impulse response (NDF) filter can be cascaded to a conventional FIR filter without the decimation effect. Thus, we can easily increase the order of the function-type filtering response and the signal processing bandwidth and the designed receiver front-end is implemented using an IBM 130nm RF CMOS process. The fabricated chip satisfies the m-WiMAX specification of an 8.75 MHz channel bandwidth and the total system power consumption is 26.63 mA from a 1.5-V supply voltage. The chip shows unwanted blocker rejection over 80 dB, with good linearity of +3.94 dB IIP3.
منابع مشابه
Multi-Band Multi-Standard CMOS Receiver Front-Ends for 4G Mobile Applications
The development of the transistor and its continuous down-scaling has allowed during the last decades the appearance of cheap wireless communication systems targeting consumer products. The complexity of these systems has increased dramatically during the last years, mainly fueled by both the Moore law and improvements in communication theory. Originally, the radio transceivers were composed of...
متن کاملHighly Compact Embedded Duplexer Implementation for WiMAX Dual-band Front-end Module with Organic Package Substrate
In this paper, low cost and high performance duplexers are investigated for WiMAX front-end module with multi-layered organic package substrate. This dual band FEM includes a 2.5GHz power amplifier die with switch and has tiny PKG form factor. In addition to module size limitation, FEM requires higher gain and stringent attenuation characteristics specification. The embedded BPFs and duplexer w...
متن کاملITB/Electronics Receiver Front-End Design for WiMAX/LTE in 90 nm CMOS
The development of wireless communication systems into multi-standard radio architectures that can process a multitude of frequency bands and modulation schemes has lead to a growing demand for wideband receiver front-ends. To allow for portability and low cost, these new architectures also need to be low power, compact size integrated circuits with a higher degree of components integrated on c...
متن کاملReceiver Front-end Design for WiMAX/LTE in 90 nm CMOS
The development of wireless communication systems into multi-standard radio architectures that can process a multitude of frequency bands and modulation schemes has lead to a growing demand for wideband receiver front-ends. To allow for portability and low cost, these new architectures also need to be low power, compact size integrated circuits with a higher degree of components integrated on c...
متن کاملA Digital-Front-End Enhanced Multi-Mode/Multi-Standard Wireless Receiver
This paper presents a multi-mode receiver concept for different transmission standards like UMTS and IS95. Due to the use of a Digital-Front-End (DFE) the requirements for the analog part of the well known direct conversion receiver (DCR) architecture decrease because channelization and fine frequency tuning are shifted from the analog into the digital domain. The adaptation of the channelizati...
متن کامل