The Spartacus Telethesis : Manipulator Control Studies A

نویسندگان

  • Jacques Guittet
  • Him Hok Kwee
  • Nicole Quetin
  • Joel Yclon
چکیده

This paper describes a method and an experimental system permitting a severely handicapped operator, such as a quadriplegic, to control a telenianipulator . These developments form the first phase in the design of the Spartacus "telethesis" . This is a manipulator system specifically developed for a quadriplegic person. Manipulator control experiments which are discussed concern four quadriplegics who have used the experimental system for significant periods of time . The present system is a laboratory simulation of a telethesis, consisting of an industrial manipulator controlled by a mini-computer . A flexible semi-sequential control and a variety of transducers permit the system to be adapted to the individual user.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Structuere, Kinematics, Constructive Design and Command for a Mobile Telethesis

In this paper, for the first, some general aspects regarding teletheses are presented. There are distinguished the main types of teletheses: fixed or mobile teletheses. A reference telethesis is described and the main cinematic determinations for forward and inverse kinematics are done. As a typical example, STAR 2, the mobile telethesis is described. For this telethesis, it was made one constr...

متن کامل

3-RPS Parallel Manipulator Dynamical Modelling and Control Based on SMC and FL Methods

In this paper, a dynamical model-based SMC (Sliding Mode Control) is proposed fortrajectory tracking of a 3-RPS (Revolute, Prismatic, Spherical) parallel manipulator. With ignoring smallinertial effects of all legs and joints compared with those of the end-effector of 3-RPS, the dynamical model ofthe manipulator is developed based on Lagrange method. By removing the unknown Lagrange multipliers...

متن کامل

QFT Control of a Two-Link Rigid-Flexible Manipulator

This paper evaluates a new and simple controller design method based on QFT (quantitative feedback theory) for a two-link manipulator whose first link is rigid and the second is flexible. A piezoelectric patch is attached to the surface of the flexible link for vibration suppression of it. This system is modeled as a nonlinear multi-input multi-output (MIMO) control systems whose inputs are two...

متن کامل

Hybrid Concepts of the Control and Anti-Control of Flexible Joint Manipulator

This paper presents a Gaussian radial basis function neural network based on sliding mode control for trajectory tracking and vibration control of a flexible joint manipulator. To study the effectiveness of the controllers, designed controller is developed for tip angular position control of a flexible joint manipulator. The adaptation laws of designed controller are obtained based on sliding m...

متن کامل

Voltage Control Strategy for Direct-drive Robots Driven by Permanent Magnet Synchronous Motors

Torque control strategy is a common strategy to control robotic manipulators. However, it becomes complex duo to manipulator dynamics. In addition, position control of Permanent Magnet Synchronous Motors (PMSMs) is a complicated control. Therefore, tracking control of robots driven by PMSMs is a challenging problem. This article presents a novel tracking control of electrically driven robots wh...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006