Glass Fabrication And Product Consistency Testing Of Lanthanide Borosilicate Glass For Plutonium Disposition

Ati+fcmdcp- %Q7Z Plutonium Silicate Alteration Phases Produced by Aqueous Corrosion of Borosilicate Glass

Doctor blade sol-gel deposition of a nano-composite copper-zinc oxide on borosilicate glass for advanced oxidative degradation of textille dye in water environment

Nano-composite copper-zinc oxide (NCCZO) was deposited on borosilicate glass using a novel sol-gel/doctor-blade technique. The photocatalyst was prepared from copper acetylacetonate, zinc acetylacetonate, monoethanolamine (MEA) and citric acid monohydrate at 75 oC, aged for 1 d and annealed at 650 oC. The properties of the NCCZO nano-composite were investigated by X-ray diffraction (XRD) and fi...

Fabrication of Low Noise Borosilicate Glass Nanopores for Single Molecule Sensing

We show low-cost fabrication and characterization of borosilicate glass nanopores for single molecule sensing. Nanopores with diameters of ~100 nm were fabricated in borosilicate glass capillaries using laser assisted glass puller. We further achieve controlled reduction and nanometer-size control in pore diameter by sculpting them under constant electron beam exposure. We successfully fabricat...

Mechanical Strength and Broadband Transparency Improvement of Glass Wafers via Surface Nanostructures

In this study, we mechanically strengthened a borosilicate glass wafer by doubling its bending strength and simultaneously enhancing its transparency using surface nanostructures for different applications including sensors, displays and panels. A fabrication method that combines dry and wet etching is used for surface nanostructure fabrication. Specifically, we improved the bending strength of...

Fabrication of Vertical and High-aspect-ratio Glass Microfluidic Device by Borosilicate Glass Molding to Silicon Structure

We propose a fabrication method of vertical and high-aspect-ratio microfluidic device which is made of borosilicate glass. Glass microfluidic devices have high demand because of its chemical stability, good bio compatibility, and high optical transparency. We realized vertical glass microwells of 25 μm in diameter and 50 μm in depth(aspect ratio: 2), and micropillars of 3 μm in diameter and 25 ...